Results 1 to 3 of 3

Thread: BRD racing cam for 3T/2T

  1. #1
    Join Date
    Sep 2015
    Location
    Sidney,BC
    Posts
    25

    BRD racing cam for 3T/2T

    Got a racing cam from BRD which turned out to be too much for my needs, Randy is very secretive about his cam grinds, so the following spec numbers are as close as he would disclose?! (A long story...)

    Gross duration 288, intake/exhaust @ 0.050 ~258-262, Valve lift 0.490, lobe separation angle 112, intake/exhaust lash 0.012/0.012.

    This cam is designed for high compression racing engines with bigger valves incl. turbo applications, also works well which NOS.

    Cam was run for about 300 km, mainly tuning time. $175

  2. #2
    Join Date
    Oct 2016
    Location
    Victoria, BC
    Posts
    1
    Hey, have you sold this yet? I'd be interested in picking it up if you havnt.

  3. #3
    Join Date
    Sep 2015
    Location
    Sidney,BC
    Posts
    25
    Still available!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •