PDA

View Full Version : Assorted AE86 parts for sale



chromedragon
05-29-2004, 03:18 PM
1 set of 14x7", 4x114.3 AR rims with an offset near 0(no number for offset printed that I can find). A little curb rash on some, but they make great drift wheels because they sit so far out. 1 set of stock pizza cutters in decent shape with some decent mismatched rubber $80 per set or $150 for all obo.

http://img16.imageshack.us/img16/1919/rollaparts1.jpg
http://img16.imageshack.us/img16/8923/rollaparts2.jpg
http://img16.imageshack.us/img16/1716/rollaparts4.jpg


1 Spats STB in decent condition(could use a polish) $130 obo, 1 stock intake pod with filter(used about 8,000km) $10

http://img16.imageshack.us/img16/2220/rollaparts3.jpg


1 drivers side door including good glass, handles, etc. VERY little rust(just the one corner where some paint chipped off - pictured). I paid $65 so that's what I hope to get for it. $65 obo.

http://img20.imageshack.us/img20/1319/rollaparts6.jpg
http://img20.imageshack.us/img20/6136/rollaparts7.jpg
http://img20.imageshack.us/img20/7249/rollaparts8.jpg


1 rear interior carpet in great shape, just needs a vacuum. $15 obo.

http://img20.imageshack.us/img20/2183/rollaparts9.jpg

All parts are in Edmonton, you can contact me at 720-2365.

Matt

76RA24
05-29-2004, 05:36 PM
the strut bar ..could you measure the height from part that bolts to the tower to where the bar connects..

and the width from inner most holes?

thanks

pete

chromedragon
05-29-2004, 08:31 PM
the strut bar ..could you measure the height from part that bolts to the tower to where the bar connects..

and the width from inner most holes?

thanks

pete
I suppose I could tomorrow. It fit just fine on an '86 Corolla GTS if that's any help? No clearance issues at all. :confused:

76RA24
05-29-2004, 10:32 PM
it would be for my 76 celica....

the measurements would be great if you can get to it.

pete

Migs
05-30-2004, 12:16 AM
AH! It's my buddy Mark's old ARE's! HAHAHAHAHA! I picked those up from PYP in Calgary like two years ago! hahahahaha how did you get a hold of them?

Migs

chromedragon
05-30-2004, 12:57 AM
They were on my car when I bought it.

Migs
05-30-2004, 12:00 PM
Did you buy Mark's old black hatchback? Or were those rims swapped onto another hachi afterwards?

Migs

chromedragon
05-30-2004, 07:36 PM
Yeah I had bought his hatchback last August. I just sold it a few weeks ago.

Strut bar is tentatively sold for $115 on Thursday. If anyone wants to buy before then it's still available as I haven't recieved a deposit.

chromedragon
05-30-2004, 07:41 PM
the strut bar ..could you measure the height from part that bolts to the tower to where the bar connects..

and the width from inner most holes?

thanks

pete
The bar measures 34 & 5/8" between the inner edges of the two inner-most holes and the height is 1 & 7/8". Hope that helps.

Project86
05-31-2004, 07:20 AM
hey matt u still have those stock tires??? i'd still like to have them haha how much u want for them still....and that strut u sold already?

chromedragon
05-31-2004, 12:41 PM
hey matt u still have those stock tires??? i'd still like to have them haha how much u want for them still....and that strut u sold already?
Oh hey Kevin, I wasn't too sure that you would still want all the stuff. The old offer for you is still open though. $300 for everything that I have for the car.

Give me a call if you still want all of it.

chromedragon
06-01-2004, 11:49 PM
Bump...... :D

chromedragon
06-03-2004, 11:16 PM
Bump...... :D
Not sure if Kevin saw this so I figured I'd give it a BUMP! :cool:

Project86
06-04-2004, 08:28 AM
hey hey haha ya i saw haha just now in school i'll try to get you the money soon...but i really really like those stock tire rims haha soo nice!! if i knew i would have got those on instead of the celica's on rite now haha sooo nice!

chromedragon
06-04-2004, 10:31 AM
Will you be out at the meet tonight? Talk with me there about it ok. :D

Project86
06-04-2004, 12:52 PM
haha ok i might come out and i might not the car needs a new starter haha so im gonna get that done rite now so we'll see if not i'll probably be tomorrow

trik1
06-04-2004, 02:13 PM
Where are you located?, interested in the Rims and Door.

76RA24
06-04-2004, 02:29 PM
Hi
about the strut bar could you find out shipping price to v2v 1s3 ? cheapest possible.

thanks

i really would like this strut bar....but it depends on shipping price.

pete
ptebbutt@bcnewsgroup.com

chromedragon
06-06-2004, 04:10 AM
Where are you located?, interested in the Rims and Door.
I'm in Edmonton.

I'd prefer not to ship since it's a huge hassle finding packaging, especially for something like a strut bar. I can check on it though I suppose, it's not going to be very cheap though.

Chromey

aeaw
06-06-2004, 09:09 AM
I don't wanna buy nothing, but what would that old honda be in the background? like year model etc.

chromedragon
06-06-2004, 11:14 AM
I thought you might be a little off your rocker there before I realized you were talking about the bike. It's a 1979 CB650. I did a teardown/cleaning/reassembly last spring and had it running, but it needed a carb sync pretty badly. It was still pretty rewarding to tear it apart and put it back together in a day. :D

aeaw
06-06-2004, 07:43 PM
looks like it's in good shape. I've got a '76 550-4, getting to be rare bikes these days, always good to see old ones taken care of.

76RA24
06-10-2004, 05:40 PM
about the strut bar ........

I checked the the canada post site about shipping 12 bucks! edmonton - mission(v2v 1s3)

will you ship to me?

contact thru email please..

ptebbutt@bcnewsgroup.com

chromedragon
06-11-2004, 04:27 AM
Would it need to be packaged though? :confused:

I could ship it though if you're willing to pay for all the shipping charges. Send me an email at chromedragon79@hotmail.com and I'll give you my address to send payment to.

Matt

ae86ist
06-13-2004, 04:04 PM
interested in the door.
how's the inside of it for rust along the bottom and sides and ****, how hard would it be to get rid of the rust pictured?

chromedragon
06-13-2004, 09:21 PM
interested in the door.
how's the inside of it for rust along the bottom and sides and ****, how hard would it be to get rid of the rust pictured?
The door is pretty damn close to perfect, the little bits of rust pictured are just from a little bit of chipped off paint. Just sand it down and repaint, simple as that. :D

Shipping the door would probably be some ridiculous price so it might be easiest to drive up to Edmonton to get it if you decide you want it. I originally bought the door because mine had a crease and bad hinges. This door was in great physical shape and there is no play on the hinge at all.

Matt

chromedragon
06-14-2004, 01:46 AM
AR wheels sold.

ae86ist
06-14-2004, 10:52 AM
hey, i might have to drive up but would you be able to check into shipping them if you get any time...i wouldn't be able to drive up untill the 28th as i sortof got grounded like yesterday but if you get time and **** gimme an e-mail to tell me how much it will cost mac1_daddy@hotmail.com ...how much did you want for the door? 65? do you have any conections asto where i can find the left door also? thanx
e-mail me
see ya

chromedragon
06-14-2004, 05:29 PM
hey, i might have to drive up but would you be able to check into shipping them if you get any time...i wouldn't be able to drive up untill the 28th as i sortof got grounded like yesterday but if you get time and **** gimme an e-mail to tell me how much it will cost mac1_daddy@hotmail.com ...how much did you want for the door? 65? do you have any conections asto where i can find the left door also? thanx
e-mail me
see ya
Well this would be the left(drivers side) door. I can check on shipping, but I can tell you right now that it will probably be more than the actual price I'm asking for the door.

ae86ist
06-15-2004, 04:16 PM
alright well it's gunna be tough to persuade my mother to let me go to edmonton but i'll try does the inside of the door still have the door pannels and ****?
thanx

chromedragon
06-15-2004, 05:14 PM
alright well it's gunna be tough to persuade my mother to let me go to edmonton but i'll try does the inside of the door still have the door pannels and ****?
thanx
Yep the door panel is there, black and grey. All handles are present and working as well.

ae86ist
06-16-2004, 12:26 PM
will you be coming to calgary any time soon i won't be able to go to edmonton untill later on this summer.?

chromedragon
06-16-2004, 05:02 PM
Sorry I don't have any plans to head to Calgary. I'll actually be gone to B.C. for most of July also.

chromedragon
06-19-2004, 08:52 AM
Strut tower bar sold.

Stock wheels, drivers door and rear carpet still left.

Project86
06-19-2004, 12:30 PM
Strut tower bar sold.

Stock wheels, drivers door and rear carpet still left.


matt put those stocks on hold im getten them when i get the cash lol i dotn want it to go cause i really like those wheels haha

chromedragon
06-20-2004, 01:38 AM
matt put those stocks on hold im getten them when i get the cash lol i dotn want it to go cause i really like those wheels haha
They're sitting here waiting for when you get the money together. :D