PDA

View Full Version : FS: first gen integra lip *BRAND NEW*



got_ae86
03-16-2006, 12:31 PM
Hey guys,

I have 2-4 stock Integra front lips. I'm going to find out from my supplier if I can get more and how many I'm getting. I'm getting them for $100 so that is pretty much what I'm looking for plus shipping of course. Let me know if you are interested. I'm in Edmonton. Oh yeah, these are brand spanking new.

Thanks,
G

newtoy
03-16-2006, 01:45 PM
I am interested, gotta try to scrounge a hundred bucks now though...:( man, what I would give for big wealth...

wakko
03-16-2006, 02:30 PM
Hey guys,

I have 2-4 stock Integra front lips. I'm going to find out from my supplier if I can get more and how many I'm getting. I'm getting them for $100 so that is pretty much what I'm looking for plus shipping of course. Let me know if you are interested. I'm in Edmonton. Oh yeah, these are brand spanking new.

Thanks,
G
how well do they fit? and the adjustments? thnx

yoall
03-16-2006, 07:42 PM
how do they look like?
do you have anu pictures?

Migs
03-17-2006, 01:22 AM
If you cut them into three sections (one center piece, two corner pieces), shorten them, then add spacers, they will fit the OEM GT-S lip very VERY well. Mind you for it it look good, you have to take your time and install everything properly.

I've got ooooold pics somewhere. I was about to do this, but then Kouki bumpers suddenly became available in Canada so I scrapped the project.

Migs

got_ae86
03-17-2006, 10:59 AM
Migs, thanks for the info.

I've ordered mine and it should be here by this afternoon. I'll be test fitting it after work and I'll let you know what mods need to be done. After I mod mine I would be able to mod the ones ordered for a small donation. Pictures up soon. Install would be available too.

G

got_ae86
03-18-2006, 12:44 AM
http://members.shaw.ca/got_ae86/fulllip.jpg
http://members.shaw.ca/got_ae86/endpiece.jpg
http://members.shaw.ca/got_ae86/modified.jpg

The first picture is the full piece you might be able to see where I cut it into 3 pieces.

The second picture is of the end piece. I've discovered that the lip is a bit short on the ends compared to the GTS bumper. Either you can keep the curve of the Integra lip and cut of the end piece but it won't line up with the end of the stock bumper. It doesn't look bad if you cut it at the right angle. Or.....what I'm going to attempt is to have the end piece line up with the end of the GTS bumper and heat up the end piece and curve it so I can have the lip all the way around.

The third picture is of the three pieces.

Pictures of the install should be done tomorrow.

One more thing, I forgot to add GST and shipping so the total is $120.


Thanks,
G