PDA

View Full Version : F/S - Colt Cams 296 Intake 296 Exhuast



Project_aw11
04-03-2006, 10:11 PM
As per the title states I have a pair of Monster 296 Intake and 296 Exhaust with 9.0mm lift Cams for the 16V 4ag made by Colt Cams they have been lightly used but decided to move on to another Project at the time they were installed. Shame to let these go, but I must.

They are located in Vancouver, B.C.

Here is the manufacture's web site http://www.coltcams.com

Asking 450.00 CDN OBO

Please e-mail @t Project_mr2@hotmail.com

I can also be found on BCMR2.com with the same handle

-Pics will be posted soon

REN69
04-04-2006, 05:23 AM
99% of DK is in Canada dude.. it might help to post a CDN price instead. :)

BTW can these run off the OEM ECU?? would they fit an AE92 Smallport?? or are they more specific??

narfy
04-04-2006, 11:05 AM
they're not a straight drop into any 16v 4A-GE

you'll need:
standalone (it runs on the factory ecm, but not very well)
valve springs
adjustable cam gears (optional)

REN69
04-04-2006, 05:02 PM
:cursing: :crybaby: I figured.. they were pretty high. :(

Project_aw11
04-04-2006, 09:50 PM
they're not a straight drop into any 16v 4A-GE

you'll need:
standalone (it runs on the factory ecm, but not very well)
valve springs
adjustable cam gears (optional)

Like the man said, These are for a serious person who are building a 4ag engine and you're right the price is a little high

$450.00 CDN OBO

bowwwman
04-05-2006, 11:27 PM
if these dont sell by the summer, ill be all over come june.
but im sure they will so, free bump!

narfy
04-06-2006, 11:42 PM
if you send project_aw11 a deposit, he WILL hold these cams for you...

Project_aw11
04-08-2006, 11:35 PM
if these dont sell by the summer, ill be all over come june.
but im sure they will so, free bump!

If your interested make me and offer, Remember OBO !

Project_aw11
04-11-2006, 06:05 PM
Item is Pending sale by fellow member

Project_aw11
04-14-2006, 12:38 PM
Pending Buyer Flaked out on me, due to not reading the thread / requirements to run
these cams, It is important to READ THREADS PEOPLE.

So there're back up for sale and I have redone my ad as follows

As per the title states I have a pair of Monster 296 Intake and 296 Exhaust with 9.0mm lift Cams for the 16V 4ag made by Colt Cams they have been lightly used but decided to move on to another Project at the time they were installed. Shame to let these go, but I must.

They are located in Vancouver, B.C.

Here is the manufacture's web site http://www.coltcams.com

Asking 450.00 CDN OBO

Please e-mail @t Project_mr2@hotmail.com

I can also be found on BCMR2.com with the same handle

Please note the mechanical requirements to run these cams below:

An aftermarket standalone
valve springs
adjustable cam gears (optional)
valve shims

You can get these cam reginded to something less aggressive where you won't need
the above requirements only shims would only be required at that point

-Pics will be posted soon

LeLe86
04-24-2006, 08:21 AM
do u still have it?
e-mail sent.

narfy
04-24-2006, 09:25 AM
actually, neil, these cams don't require special shims to run... they run the same size base circle as the factory, so theoretically, no adjustments required...

and these cams were orignally purchased from colt cams thru gtspartsman...

Project_aw11
04-24-2006, 07:54 PM
Thanks Narfy, I'm not a mechanic, just a driver

Project_aw11
04-24-2006, 07:55 PM
do u still have it?
e-mail sent.


Yes, replied as still available

Project_aw11
05-03-2006, 07:44 PM
B U M P

Still available

joey jo jo
05-04-2006, 12:16 PM
Wow I seriously cannot believe these cams haven't sold yet! I run Colt regrinds and love them. Even regrinds cost 400 for the two, so someone buy these!

narfy
05-04-2006, 12:22 PM
these are great bumpsticks to send for re-grinding...

REN69
05-04-2006, 05:52 PM
I didn't mean high price.. I meant a high number as the OEM's are what?? 242 (I believe) and yours are 293 :o :o

Project_aw11
05-05-2006, 05:26 PM
I didn't mean high price.. I meant a high number as the OEM's are what?? 242 (I believe) and yours are 293 :o :o

I wish I had some OEM's one's to put side by side with these, there's alot of meat on these
bumpsticks !

Project_aw11
05-16-2006, 07:12 PM
Cams Still F/S

Now By-weekly Bump !

Project_aw11
05-28-2006, 12:20 AM
Again Still F/S Am taking offers everyone

neal2000
05-28-2006, 06:44 PM
If these were 264 I'd be allllll over it like a fat kit on a cup cake, but a tid bit to rough for wanting to keep a nice daily driver. But for anyone out there that doesn't know colt cams, they make the absolute best cams you can get. I have them in my corolla and my truck and love em!

Project_aw11
06-08-2006, 06:24 PM
Item Is still F/S


MUST GO - $300.00 OBO

Brian
06-08-2006, 09:50 PM
Hmm... that's less than 1/2 price.

Somebody with a megasquirt buy these cams!

Project_aw11
06-14-2006, 05:30 PM
Cams are on hold until June 24th for fellow board member

Project_aw11
06-17-2006, 05:55 PM
Item Has been Sold, and has been picked up

geneluo
06-20-2006, 12:31 AM
hey guys I picked them up on my way to a wedding...................he he he.......mmmmmm....grease and white shirts go great....lol..........everything went as smooth as silk.........thanks Neil next time i'll come up there and we'll hang out and check out that never ending project of yours.........thanks.........