Silly Wabbit
04-16-2006, 05:00 PM
This is a very long list of parts
Frame was bought late summer in 05. Got only 7 rides on bike (3 at Whislter 1 at Cypress)
frame is in better condition than some new ones frome stores
05 Frame with Fox DHX5.0 Propedal shock size small/reg
Marzzochi 888R forks with Marzzochi DH stem
BlackSpire low profile DH Headset
Easton Mokey Lite Scandim bar
Shimano LX 9spd shifter
XTR rear deraileur
Avid full metal jacket housing used as shifter housing- reason is there is no cable compression and eliminates binding of cables when your linkage cycles through it's travel. Basically the bike shifts like a hardtail. vely vely cool
ODI lock on grips with bar end plugs
Hayes Mag DH F/R brakes with mud cutter front rotors/ reg. rear with Envy lever blade upgrade- allows better lever pull results in more braking power
Hadley 20mm hub laced to Sun Mag30 Rim handbuilt(bought after frame 2 rides)
Hadley rear hub(O/H at Norco with new bearings) laced to Mavic D321 handbuilt
Michelin DH tires F/R with good tread
Nokian or Mich tubes- can't remember
Red anodized dice valve caps- matches frame color:D
Truvative Holzfeller cranks 170mm
Truvative GigaPipe BB
Truvative chain guide
Sun Ringle Zu Zu pedals
XT 9 spd cassette
XT 9 spd chain
Axiom seatpost
WTB saddle
Eyeball bell with missing eyeball
Spares with bike
Spare set F/R Hayes sintered brake pads
Marzzochi Seal kit for 888R forks
Original Hayes lever blades
Aluminum rear wheel axle by AMT
Every part on this bike is less than 1 year old except the rear derailleur and cranks wich are used less than 1 year. I worked the industry for a few year and had collected lots of parts
Hadley thru-axle rear hub
http://www.86tuning.com/images/richards%20bike/IMG_2634.JPG
Hadley 20mm front hub
http://www.86tuning.com/images/richards%20bike/IMG_2635.JPG
No dings on the downtube
http://www.86tuning.com/images/richards%20bike/IMG_2636.JPG
Fox Racing DHX 5.0 with propedal
http://www.86tuning.com/images/richards%20bike/IMG_2639.JPG
http://www.86tuning.com/images/richards%20bike/IMG_2640.JPG
XTR rear derailleur, long cage, no scratches, plus Hayes rear caliper & rotor. Mavic 321 Rim, plus fuzzy dice tire stem cap.
http://www.86tuning.com/images/richards%20bike/IMG_2642.JPG
Intense! MAG30 front wheel
http://www.86tuning.com/images/richards%20bike/IMG_2643.JPG
New spares (in packages). Rear axle, fork seals, hayes brand brake pads, the original OE hayes levers (I'm running Envy ones on the bike right now)
http://www.86tuning.com/images/richards%20bike/IMG_2644.JPG
Bike price $4000.00 OBO
--keep in mind a new team bike retails for almost $6000.00 + GST
Other parts I have for sale prices are all OBO
New Maxxis Minion DH F Super Tacky 26x2.5 $60.00
New Michelin Wild Gripper DH 26x2.5 $60.00
New Michelin Comp 32 S 26x2.8 $60.00
New FSA Pig DH Pro deep cup headset $50.00
New FSA Pig DH lower cup headset $25.00 -SOLD
New Haro BMX magnesium sealed cartridge pedals $50.00
New Avid Juicy bleed kit $40.00
New Avid disc brake pads $20.00
New XTR rapid rise rear derailleur $160.00
NEW Shimano LX 9spd cassette 11-32T $60.00
New ODI Ruffian Grips with clamps $25.00
New 26" Alex DX32 Rim 32H Black $40.00 -SOLD
New Shimano Ultegra rear derailleur $90.00
Used stuff for sale
05 Shimano Ultegra group with Dura Ace rear derailleur and 105 STI(brake/shift levers)
No rear hub
will include
New still in wrap set of Mavic Open pro Rims 32H
New Michelin tubes x2
New Ritchey Pro Slik road tires x2
New Dura Ace brakes pads
$1300.00 used less than 6 months
Front Wheel Formula 20mm hub with Mavic D321 handuilt comes with new bearings $75.00
Shimano DX downhill pedals the red ones $40.00
Will trade for some AE86 performance parts
Thanks
Richard
604-764-8772
Frame was bought late summer in 05. Got only 7 rides on bike (3 at Whislter 1 at Cypress)
frame is in better condition than some new ones frome stores
05 Frame with Fox DHX5.0 Propedal shock size small/reg
Marzzochi 888R forks with Marzzochi DH stem
BlackSpire low profile DH Headset
Easton Mokey Lite Scandim bar
Shimano LX 9spd shifter
XTR rear deraileur
Avid full metal jacket housing used as shifter housing- reason is there is no cable compression and eliminates binding of cables when your linkage cycles through it's travel. Basically the bike shifts like a hardtail. vely vely cool
ODI lock on grips with bar end plugs
Hayes Mag DH F/R brakes with mud cutter front rotors/ reg. rear with Envy lever blade upgrade- allows better lever pull results in more braking power
Hadley 20mm hub laced to Sun Mag30 Rim handbuilt(bought after frame 2 rides)
Hadley rear hub(O/H at Norco with new bearings) laced to Mavic D321 handbuilt
Michelin DH tires F/R with good tread
Nokian or Mich tubes- can't remember
Red anodized dice valve caps- matches frame color:D
Truvative Holzfeller cranks 170mm
Truvative GigaPipe BB
Truvative chain guide
Sun Ringle Zu Zu pedals
XT 9 spd cassette
XT 9 spd chain
Axiom seatpost
WTB saddle
Eyeball bell with missing eyeball
Spares with bike
Spare set F/R Hayes sintered brake pads
Marzzochi Seal kit for 888R forks
Original Hayes lever blades
Aluminum rear wheel axle by AMT
Every part on this bike is less than 1 year old except the rear derailleur and cranks wich are used less than 1 year. I worked the industry for a few year and had collected lots of parts
Hadley thru-axle rear hub
http://www.86tuning.com/images/richards%20bike/IMG_2634.JPG
Hadley 20mm front hub
http://www.86tuning.com/images/richards%20bike/IMG_2635.JPG
No dings on the downtube
http://www.86tuning.com/images/richards%20bike/IMG_2636.JPG
Fox Racing DHX 5.0 with propedal
http://www.86tuning.com/images/richards%20bike/IMG_2639.JPG
http://www.86tuning.com/images/richards%20bike/IMG_2640.JPG
XTR rear derailleur, long cage, no scratches, plus Hayes rear caliper & rotor. Mavic 321 Rim, plus fuzzy dice tire stem cap.
http://www.86tuning.com/images/richards%20bike/IMG_2642.JPG
Intense! MAG30 front wheel
http://www.86tuning.com/images/richards%20bike/IMG_2643.JPG
New spares (in packages). Rear axle, fork seals, hayes brand brake pads, the original OE hayes levers (I'm running Envy ones on the bike right now)
http://www.86tuning.com/images/richards%20bike/IMG_2644.JPG
Bike price $4000.00 OBO
--keep in mind a new team bike retails for almost $6000.00 + GST
Other parts I have for sale prices are all OBO
New Maxxis Minion DH F Super Tacky 26x2.5 $60.00
New Michelin Wild Gripper DH 26x2.5 $60.00
New Michelin Comp 32 S 26x2.8 $60.00
New FSA Pig DH Pro deep cup headset $50.00
New FSA Pig DH lower cup headset $25.00 -SOLD
New Haro BMX magnesium sealed cartridge pedals $50.00
New Avid Juicy bleed kit $40.00
New Avid disc brake pads $20.00
New XTR rapid rise rear derailleur $160.00
NEW Shimano LX 9spd cassette 11-32T $60.00
New ODI Ruffian Grips with clamps $25.00
New 26" Alex DX32 Rim 32H Black $40.00 -SOLD
New Shimano Ultegra rear derailleur $90.00
Used stuff for sale
05 Shimano Ultegra group with Dura Ace rear derailleur and 105 STI(brake/shift levers)
No rear hub
will include
New still in wrap set of Mavic Open pro Rims 32H
New Michelin tubes x2
New Ritchey Pro Slik road tires x2
New Dura Ace brakes pads
$1300.00 used less than 6 months
Front Wheel Formula 20mm hub with Mavic D321 handuilt comes with new bearings $75.00
Shimano DX downhill pedals the red ones $40.00
Will trade for some AE86 performance parts
Thanks
Richard
604-764-8772