PDA

View Full Version : Parting out 87 GTS (3 weeks and its gone)



Loki440
07-24-2006, 01:12 PM
Ok i have a Black 1987 Corolla GTS that im parting out, the body is shot so dont expect there to be a good panel anywhere. But the majority of all the rest of the car is there, as for big items because of where i am currently (Prince George) you will have to arrange for pickup or own means of shipping because its such a hassle.

So offer me any reasonable offer for whatever part you want and ill probably take it, because either way in 3 weeks this car is going to the wreaker. So first come first serve as long as its somewhat reasonable.

I will also accept trades on performance goodies (not like i have much to trade for lol) and a rust free hatch cause i need one

but heres some pic of the parts car, it basically completely gutted.
http://www.roggs.ca/Pictures/Corolla/Parts.jpg

pitobread
07-24-2006, 03:15 PM
I'll straight trade you that bracket (pending condition) for a upper 4 link(the small ones)

do it.

1Xuan1
07-24-2006, 09:48 PM
where did you exacly say where you live?
i'm pretty intresteted in your seats that you have there front and rear seats

bigjoe87
07-24-2006, 09:58 PM
front seats?:o really verry interested:D

Famousmat
07-25-2006, 06:31 AM
are those wheels a full set..wouldnt mind the set....how about $100 with rubber

mako
07-25-2006, 07:23 AM
Got a tranny?

Loki440
07-25-2006, 09:13 AM
ok currently im located in Prince George B.C. as far as seats goes there a little beat up, dont think they have any rips, but i could defintely be wrong, and there a bit moldy, due to the previous owner of the car,

As for wheels yes its a fullset, but the rubber is shot, but i wont sell the wheels till the very end because i still need to move this beastie around, that and i havent decided yet whether or not to use those rims or my pizza cutters for winter rims cause im definetly not gonna use my starsharks.

mako yes its got a manual tranny

and pito ill check the condtion of them once i get that car rolled out

zoli
07-25-2006, 09:24 AM
Do you have the headlight switch mechanism? Not the knob, but the actual switch that turns the headlights on and off along with the dash light control. If you know it's working, I'll take it.

Loki440
07-25-2006, 09:32 AM
pretty sure its working, but have to go find it, but im sure i have it

slideways gts
07-26-2006, 04:18 AM
how much for the steering wheel?

SalEsh
07-26-2006, 07:24 AM
do you have the door rolling up mechanism.... window crank?? like the whole assemly.


Brandon

Loki440
07-26-2006, 09:02 AM
salesh yes and for both doors, but if i remember there a pain in the arse to get out, side note did you get those cf parts, as im still looking for a rust free hatch

and slideways, once i get the car out further i can take that wheel off, but give me a reasonable offer, ill take pics once i take the engine out of there for anothere forum member

Loki440
07-26-2006, 09:07 AM
oh and zoli found the headlight switch, it has a bit of corrosion on it but im pretty sure it still works, that and it moves freely

slideways gts
07-26-2006, 01:24 PM
i really dont know what to offer on the steering wheel, i really have never seen them for sale before haha. but i have a usdm one i could trade +cash since i imagine you need a wheel on there to steer it up onto a trailer. pm me what you think is fair.

Loki440
07-26-2006, 02:59 PM
nah dont need a wheel once i bring it out, as visegrips will surfice till its on the trailer heading for the wreaker, as for price they do come up every now and again just look for jdm wheel (seeings how the canadain wheel and the jdm wheel are the exactly the same) but for a good condition one they typically go for 50-75 usd on ebay for refference

SideWinder
07-28-2006, 10:54 PM
Hey there,

Just wondering what the mileage is on the engine? Reason being is Im looking for a power-steering adjuster pulley with bearing and a power steering pulley bearing. If you have it, what condition are they in? Also how much for both?


SideWinder

leung_dog
07-29-2006, 02:47 AM
hows the rear axle assembly and everything with it ? how much u want for that stuff. i can work out a cheap shipping deal cuz my dad works for purolator. pm the price.

Loki440
07-30-2006, 10:31 AM
the rearaxle i think is fine, dont really know cause i just bought this car for a couple of parts, but what would you all want with it.

Oh and just to let you know

the engine wiring harness was sold a long time ago
and the engine is now sold

but other than that not much else

ryosuke
07-31-2006, 06:24 AM
got any tail lights

Loki440
07-31-2006, 09:40 AM
ah yes i do, and the darn near mint also, but ill post some pics today of some various stuff

mr e
07-31-2006, 09:54 AM
How's the Dizzy on that car? I sorta need one. How much for it and to ship it to L6S 5L5?

Loki440
07-31-2006, 03:06 PM
Mr E make me an offer, as at the moment the engien going to another forum member has the dizzy still attached just cause it was easier to take engine out in one piece, but he said he didnt need it so i can remove it before his buddy comes and picks it up.

Loki440
07-31-2006, 03:14 PM
Alright i tooks some pics of some parts you might be intrested in (damn just realized i forgot to get a pic of the steering wheel, but ill get to that later)

anyways pic one we got a kouki grill in good shape, and a black dash thats also in good shape(pic 2 shows the small yet long crack that on the drivers side above the gauge cluster.

pic3 side window trim in good shape, and a good condition kouki gauge cluster

pic4 a bunch of hubcaps (i might keep a set) some headlight trim and a rear marker light set.

pic5 a darn near mint Kouki taillight set (couple scratches on the center piece), and a not so mint zenki set of tail lights

pic6 Pretty well a complete decent condition (all thoe dirty) black plastic interior set


http://www.roggs.ca/Pictures/Corolla/Parts1.jpg

http://www.roggs.ca/Pictures/Corolla/Parts2.jpg

http://www.roggs.ca/Pictures/Corolla/Parts3.jpg

http://www.roggs.ca/Pictures/Corolla/Parts4.jpg

http://www.roggs.ca/Pictures/Corolla/Parts5.jpg

http://www.roggs.ca/Pictures/Corolla/Parts6.jpg

ae604hatch
08-01-2006, 02:47 AM
do you have rear calipers for sale?

mr e
08-01-2006, 04:45 AM
i've been offered a Dizzy in Toronto for $30, so Call it $35 including gas to go get it.

So $35 including shipping?

Loki440
08-01-2006, 10:45 AM
id grab that dizzy in toronto, that way i dont have to worry about taking it off the engien and packageing and shipping it.


ae604hatch that would be a yes

mr e
08-01-2006, 02:29 PM
id grab that dizzy in toronto, that way i dont have to worry about taking it off the engien and packageing and shipping it.


ae604hatch that would be a yes


It's all good, I needed one and found it at a Japanese parts Distributer, $90 but I didnt have to wait for it and I can throw it on my car tonight.

Thanks anways.

cs3tcr
08-04-2006, 11:24 AM
Engine arrive safe and sound, thanks for the excellent service.
Cheers,
Rod

super_hachi
08-04-2006, 04:31 PM
are the axles still available? if so how much to ship to calgary. i want them just need a ball park to get em here

Loki440
08-08-2006, 11:25 AM
yep the axles are still avaliable as for shipping no clue, but depending on how im comming back to calgary (looking for another vehical) i might be able to throw them in a trunk to save shipping for you, but i will know more once i find a vehical and all that

aeoldschool
08-08-2006, 02:41 PM
whats all therer for kouki door panels and stuff

I need every thing except dash and center consoule, let me know;)

tranny to k

AndrewE
08-10-2006, 09:03 AM
got engine and trans mounts , gas tank if shippable, and intake manifold???

ryosuke
08-10-2006, 11:05 AM
how much for the tail lights, shipped to L2M 3L8