View Full Version : FS : AE92 D2 full coilovers

12-17-2008, 05:19 PM
Mint with original box and all. These coilovers were purchased for my ae92 buildup, but I changed to the ae86 platform. These were on the car for about 2 months. Paid 1300 shipped for them. Looking to get 600 firm.


If interested pm me! Shipping isnt a problem as I have the original packaging.

rob rayne
12-17-2008, 05:23 PM
why not use them on ur ae86??

12-17-2008, 05:31 PM
why not use them on ur ae86??

kuz they don't fit...

what are the spring rates?

rob rayne
12-17-2008, 05:33 PM
open mouth: incert foot .are u serious. then why am i using s13 coilovers on my ae86? a friend of mine used st205 tein coilovers on his s13. it only takes a little mesuring to figure out what u need to run those.

12-17-2008, 06:05 PM
Your AE86 may have had massive mods done because this is what AE86 coilovers look like:
Pay attention to attachment points and how much they differ.
For non fabricators, adapting something completely different for AE86 might be more work than is welcome.

That or you are referring to just spring hat and coilover SLEEVES. Those certainly are interchangeable so long as they fit. My Mr2 used Miata coilover sleeves.

rob rayne
12-17-2008, 06:11 PM
why do u have to use ae86 stuff. like i said im using s13 stuff. those look like they have the same style macpherson strut with the two bolt holes. ill take more angle and better coilovers for cheaper than shilling out 1200+ for ae86 coilovers

ps s13 stuff doenst need any welding either. and bigger brakes too

12-17-2008, 06:32 PM
I'd want more of a drop in solution for my AE86. I'm thinking Megan coilovers.

12-17-2008, 06:38 PM
Oh and these are the default spring rates. Took some pics of the box!


12-17-2008, 06:40 PM
These coilovers work for 93-97 corollas as well (ae101)

rob rayne
12-17-2008, 06:41 PM
definlty hawtness good luck with sale

12-17-2008, 07:35 PM
oh snap! why do I have to get laid off! :yikes: I needz teh suspensions too! :(

12-17-2008, 08:00 PM
I also have whiteline adjustable front and rear swaybars and bead blasted a arms etc with all super pro poly bushings. Only about 3000 km on all of those bushings.

12-18-2008, 07:52 AM
That's one helluva deal, it makes me want to spend money on my ae92

12-24-2008, 09:35 AM
For those who have asked to see the accessories/tools, here ya go!

12-24-2008, 11:36 AM
All ready to go! Original jdm bags of air included and all!


For track racing cars ONLY! lols

12-24-2008, 02:16 PM
open mouth: incert foot .are u serious. then why am i using s13 coilovers on my ae86? a friend of mine used st205 tein coilovers on his s13. it only takes a little mesuring to figure out what u need to run those.

Rob did you have to do any mods for them to fit, or is it an easy bolt in?

rob rayne
12-24-2008, 06:58 PM
i didnt mean to thread jack the op, but s13 stuff is realtivy easy to install in a ae86. u can rock ae86 camber plates on s13 coilovers with s13 hubs brakes and lower control arms. in the stock cross member and the u use ra64 (celica 84-86.5) tie rods and there is no cutting welding or nothing. the only real side effect is 1-2 degrees negatve camber with the camber plates full positive.

12-26-2008, 08:51 AM
stop thread jacking and get your own thread foos! :)

01-03-2009, 09:39 PM
Bump, need these sold. Lots of interest but no takers yet!

01-10-2009, 08:13 AM

01-14-2009, 07:29 PM
Sold! Someone got a steal on these :)

01-14-2009, 07:50 PM
crappy, I wanted these bad! :(

01-14-2009, 07:52 PM
nice buy!

01-14-2009, 08:13 PM
Well I'll have the rest of the suspension goodies up for sale soon, how bout some Whiteline sways ren? lol