View Full Version : RA21 Coilovers, etc.

01-30-2009, 10:49 PM
RA21 struts with Ground control coilovers, T3 Camber plates (RA21 bolt pattern), Koni Sport adjustable inserts, new wheel bearings and rotors. Everything is new, never driven on. It was mounted on my Celica for a while but thats it. $500 +shipping. Keep in mind, they are big and heavy so shipping will probably be expensive.

01-31-2009, 07:10 PM
Not for my sake because I have no need for it (though those are sick parts), but for the sake of the post, what rates are the springs?

02-01-2009, 04:05 PM
Thanks for asking about the spring rates, Randy. I am interested in knowing what the spring rates are too.
What part number are the koni's? They look to be the old style non gas charged type that cannot be adjusted on the car? If they were the top adjustable type, i'd probably buy this from you.

02-13-2009, 07:56 PM
Sorry I totally missed the boat on this, I forgot I posted it on here. Oops.
Uhh, spring rate, I don't know, I bought them like 3 or 4 years ago and I can't remember but the Ground Control guy suggested them for my car after I told him what I was planning. Being that AE86 and RA21 are so close in weight distribution (especially with a 4ag conversion) they are probably in the 8k range.
The Konis are the older style, that you have to remove to adjust. They are NOS for '7x Celicas. Its a set it and forget it type deal.

02-13-2009, 10:29 PM

02-14-2009, 10:45 AM
how far do you live from the airport?.i work for aircanada.shipping would be very cheap.my friend would love this.:patriot:

02-14-2009, 10:49 AM
The airport's a reasonable drive away. If you can get cheap shipping, I'll take it to the plane. Keep in mind the box is just under 70 Lbs.

02-16-2009, 01:49 PM
There's numbers on those springs, I just can't read them. They have periods separating groups of numbers. If you could tell us what those numbers are.

0000.0000.000 <they go like that.