PDA

View Full Version : FS- Wilwood triple master brake/clutch pedals



coreworld
02-28-2009, 08:30 PM
Hey, I just bought these off ebay thinkin they would be rad for my drift car build but they just wont fit around the steering column in an 86.

They are the aluminum three master cylinder clutch/brake pedals with balance bar. They also have Wilwood Composite master cylinders two 1" and one 3/4" for the clutch.

This setup is crazy light, probably the lightest pedal setup you can get.

So if anyone is building a Locust or something these would be perfect. I will post up pics tomorrow.

Here is a link of them
http://www.wilwood.com/Products/005-PedalAssemblies/003-RSMP/rsmtmc/index.asp

So these cost me just under $350 with shipping and duty Im looking to get close to what I paid for em. I literaly took them out of the box last night.
Lets say $300 OBO
located in Edmonton

BenR
03-01-2009, 12:15 AM
nice pedals

i have wanted to put in custom pedals since i saw this photo.http://www.ae86.hu/wp-content/gallery/FA_coupe_2/021.jpg
made by tilton though, wilwood also makes a floor mount single pedal. but i like the remote bias adjuster w/tilton
http://www.tiltonracing.com/content.php?page=list2&id=8&m=b

Rastaracer
03-01-2009, 12:18 AM
Would they work if you remote mounted the res?

visean
03-01-2009, 01:02 AM
Are you getting rid of your brake booster by using the kind of setup?

coreworld
03-01-2009, 08:54 AM
The reason they dont fit is that the brake pedal needs to go pretty much right through the steering column. If you really wanted to you could probably bend/cut/weld the pedal arms to clear the steering column and have the pedal pads still be in a usable location but I'm just not willing to cut em up.

coreworld
03-14-2009, 11:22 AM
sold