PDA

View Full Version : FS:4AG with megasquirt project



thumper
03-03-2010, 08:39 AM
Hello Everyone,

So I did a compression test on my new motor that will be going in my car and it it awesome, so i got a ton for sale. There will be more for sale later on, as my project continues. here is the start.

ae86 stuff

4ag rebuilt shaved head with aem cam gears, bully stage 3 clutch
stock oil cooler, lines, 4ag trd wires, full engine gasket kit.
semi-tucked harness, ecu
KEEPING THIS.

t50 tranny, tranny hard to downshift from 3rd to 2nd.
80

brand new megasquirt II 3.0 w/relay board, stim, gm iat, vibrant iat bung, db-37 cable, db-37 to usb connector, edis-4 coilpack, edis-4 module, trigger wheel, VR sensor, brand new 8 mm wires escort wires
SOLD

newer radiator SOLD
440 supra injectors SOLD

These are currently assembled in a ae86 catback. Welds would need to be redone. 180 for everything
vibrant 2.25 in flat black muffler used 80
vibrant 2.25 in high flow cat used 80
vibrant 2.25 in piping for catback 50

ae92 side skirts. Used 4 front pieces and had them joint. Needs bodywork 50
ae86 master cylinder and brake booster. 50
ae86 clutch cylinder and resevoir, lines. 40

s13 240sx stuff

lug front and rear of my s13. straight bolt on to s13, all parts were new when I put it together. Used for last drift season for 4 drift events includes :

- Ichiba front 5 lug
- r32 front 4 piston calipers
- dba front rotors and pads
- full hub assembies
- new ball joints
- rear r32 calipers.
- rear 5 bolt assembilies.
- dba rotors and pads.
- rear subframe, welded diff.
- ksport ebrake

1200 obo OR 1000 without ksport ebrake

- megan front upper strut bar. 70

- std coilovers - 1000

onderground designs rear overfenders - 300
onderground designs front fenders - 300
onderground designs rear bumper - 200


17 x 9 +20 saleen mustang replica rims mounted on general tires. 900 obo

Tires for sale

Continental sport contact 2
225/45/17 x 2
235/45/17 x 3

Continental sport contact
225/45/17 x 2

25mm 5 bolt on front spacers - 160

greddy front mount intercooler with bov - 450 obo

stock hood - 60 obo
stock doors and glass, no door panels - 120 for both.
stock hatch with aluminum wing - 200
s13 hub. 40

ignited 60mm boost, air/fuel, water temp and oil temp gauges - 120 for all
ignited kill switch / flight switches.

rear side glass - 60 per side
headlight assemblies with motors - 50 for both
sunroof - 50
stock taillights
roll cage - 600 obo


misc stuff
alpine cva-1005, alpine dva-5210, alpine s-624 with pre 98 honda harness SOLD
jvc arsenal cd/ mp3 deck with pre 98 honda harness 80
sony xsplod cd mp3 deck with pre 98 honda harness 80
clarion 6 disc cd changer with cenet cable 60
honda b18c valve cover needs paint 40



I am located in Markham.

Thanks

japeople
03-03-2010, 09:35 AM
this sounds fair i think

Trigger Happy
03-03-2010, 10:07 AM
If you were to part out how much would you take for the short shifter?

Dugwillis
03-03-2010, 10:09 AM
fair? this is the deal of the century!

cusco mounts are the best
TRD wires are killer
supra injectors
megasquirt
rest is gravy


BUMP

thumper
03-03-2010, 10:49 AM
thanks guys.

megasquirt cost me over 600 alone from diyautotune and i did not even use it. all the motor mounts, trd wires etc. were brand new when I put all this together. Less than 3000kms on all these.

I spent a ton of money on doing this but it is time to move on to another platform.

I also have a new t3/t4 turbo, brand new vibrant intercooler piping, vibrant intercooler, vibrant bov flange, vibrant t3 turbo flange, 4ag exhaust manifold flange, brand new turbosmart wastgate, used greddy bov, and a ton of extra parts I would consider selling for additional on top of this package. I have not though og a price yet though.

First step sell motor package. If this sells for a price i am happy with then there may be a huge partout coming soon.

VickersGTS
03-03-2010, 10:56 AM
this is basically everything I need to get my POS running.

PM comin your way.

cerealmaniac
03-03-2010, 11:30 AM
bump for good deal

thumper
03-03-2010, 11:31 AM
If you were to part out how much would you take for the short shifter?

sorry trigger happy dont want to part it right now.

If someone wants to buy just the motor let me know and then I can part the rest.

Trigger Happy
03-03-2010, 11:35 AM
sorry trigger happy dont want to part it right now.

If someone wants to buy just the motor let me know and then I can part the rest.

Okie dokie, if you do part out though let me know

JungleMatic
03-03-2010, 12:12 PM
Vickers needs this. This is a threat lol.

VickersGTS
03-03-2010, 01:48 PM
^^ word.

/hard and intimidating e-thug pose.

mr e
03-03-2010, 04:30 PM
I also have a new t3/t4 turbo, brand new vibrant intercooler piping, vibrant intercooler, vibrant bov flange, vibrant t3 turbo flange, 4ag exhaust manifold flange, brand new turbosmart wastgate, used greddy bov, and a ton of extra parts I would consider selling for additional on top of this package. I have not though og a price yet though.

First step sell motor package. If this sells for a price i am happy with then there may be a huge partout coming soon.

Let me know about this turbo setup. I'm looking for something for my car, this may fit the bill...

mr e
03-03-2010, 04:34 PM
WARNING!!!

Every time I refresh this page I get the following Trojan horse message from my Antivirus. (Avast)

(See attachment for print screen)

It could be someone's Signature picture, or one of the links, or someone being GAY!

It's VickersGTS... Cause it loads the same thing in this thread here http://www.dorikaze.net/showthread.php?t=29062&page=4 and VickersGTS is the only common person. Further more when you load his profile the same Trojan pops up.
http://www.dorikaze.net/member.php?u=20 <-- his profile.

Sorry VickersGTS... you are spreading some form of Internet based "STD"

celica-fiend
03-03-2010, 04:56 PM
fixed.. thanks for letting us know..

Brett

cerealmaniac
03-03-2010, 04:57 PM
hey mr e i've been getting the same problem. it's on every page of DK.

thumper
03-03-2010, 06:55 PM
I am going to put this sale on hold for a day or 2. when going through my stuff I am finding out more and more things I forgot I had.

I will figure out individual prices for things. and make a complete list.

Send me offers on things you would want, so I can start sorting out this stuff.

Thanks

cruzzinn
03-03-2010, 08:25 PM
I,d be interested in the Cusco motor mounts and tranny mount
and maybe the escort wire set if parting ???
Keep me posted if parting anything.

VickersGTS
03-04-2010, 06:44 PM
Sorry about the aids guys.. Anyway, I still want a whackload of this stuff. Holler atcha boy D-wayn.!

thumper
03-08-2010, 07:59 AM
its official, its a part out.

Trigger Happy
03-08-2010, 08:47 AM
Check your pm's

carthik2
03-08-2010, 07:08 PM
if nitin decides he doesnt want the turbo stuff put me second in line. my e30 could use some boost. Oh, and what kind of nardi is it? what size, color, and what kind of quick release? can I has dibs on wheel.

RONG
03-09-2010, 02:35 PM
Hey im seriously interested on buying your whole catback assembly. Do you have some pics to show me? I would like to see the condition. Im located in St. Catharines so i would looking to pick it up. Thanks

thumper
03-10-2010, 06:53 AM
Hey im seriously interested on buying your whole catback assembly. Do you have some pics to show me? I would like to see the condition. Im located in St. Catharines so i would looking to pick it up. Thanks

I will get you some pics later today, I have some at home.

Thanks

thumper
03-10-2010, 06:55 AM
the nardi is 330mm. It is a nardi classic. silver face, black leather wheel. leather is scratched in places. and does not have the nardi horn button.

I will get pics later tonight.

thumper
03-11-2010, 02:31 PM
pics of exhaust and steering wheel. steering wheel does not have horn.

http://img.photobucket.com/albums/v176/thumper1/IMG00222-20100308-1542-1.jpg

http://img.photobucket.com/albums/v176/thumper1/IMG00223-20100308-1543.jpg

http://img.photobucket.com/albums/v176/thumper1/IMG00249-20100311-1533.jpg

http://img.photobucket.com/albums/v176/thumper1/IMG00248-20100311-1533.jpg

Jehuty77
03-11-2010, 02:33 PM
How bad are the AE92 Skirts? Any Pics?

thumper
03-11-2010, 02:38 PM
not that bad, one side needs to be rejoined properly.
I can get pics Later tonight, if not it will be tomorrow.

Thanks

Jehuty77
03-15-2010, 07:35 AM
Skirts?

thumper
03-15-2010, 09:17 PM
^^ sorry been pretty busy lately.
here is a pic of the one that needs to be rejoined.
the other one looks exactly the samebut in one piece.

http://img.photobucket.com/albums/v176/thumper1/IMG00263-20100315-2300.jpg

thanks

Jehuty77
03-15-2010, 09:44 PM
how does it line up with the body(crack aside)? how'd it break?

thumper
03-16-2010, 04:46 AM
It was cracked where it was joined together by fiberglass.
this is how it looked when it was on my car.
http://img.photobucket.com/albums/v176/thumper1/CIMG2375.jpg

roblee
03-17-2010, 01:57 PM
can i get the clutch master an lines?.

thumper
03-20-2010, 04:24 PM
make a offer, motor has to go.

Can part clutch, cam gears.....

250 for clutch / pressure plate.

120 for cam gears.

carthik2
03-21-2010, 11:25 AM
thumper, how much for the turbo stuff? send me a pm.

thumper
03-23-2010, 08:36 PM
most of the turbo stuff is gone. I am keeping the rest of the turbo stuff.

REN69
03-24-2010, 03:40 PM
I know someone looking for skirts... what's your email?

ChrisP
03-25-2010, 10:43 PM
I PM'ed you about the exhaust but have not received a reply.

thumper
03-29-2010, 12:00 PM
make a offer on anything.
Thanks

GEEROME
04-02-2010, 12:44 AM
motor still for sale?........

thanx

jerome

thumper
04-03-2010, 04:28 AM
motor still for sale?........

thanx

jerome

Yes, It is still available.

thanks

thumper
04-08-2010, 07:08 AM
bump, make a offer on remaining stuff. first post updated.

Midnight_D
04-10-2010, 05:48 PM
is the short shifter still available?
are you willing to sell your front and rear bumper?

thumper
04-11-2010, 10:34 AM
Which bumpers? corolla or 240.
I have a corolla gts bumper. make me a offer. it is grey. 240sx bumpers I have the body kit for the rear.

Thanks