PDA

View Full Version : Carthik's Parts Sale Part 1



carthik2
07-31-2010, 12:53 PM
Ok. First off I want to say a lot of local guys called dibs on all my random parts but I have lost track of who wants what. So some local guys might have priority over you non-local guys. I will honor dibs for 48 hours. Parts are located in the GTA. Will ship at buyers expense. Some prices are firm, some are OBO, just see next to the price. Please excuse the cellphone pics, camera is down. If you would like some more high res better quality pics let me know. Please make all offers via PM ONLY. I will not be negotiating prices in this thread. If you need a part ASAP for like the next drift event or whatever I encourage you to look elsewhere. My parts are scattered across 2 shops and my house and I am a very busy person, so please be patient if you need parts shipped. If you want to low ball me go ahead, worst I can say is no. Just letting you know I am in no rush to sell and not desperate to sell.

1. Pair of Momo fixed bucket seats brand new, never used. 350 Firm.

http://img.photobucket.com/albums/v645/carthik/momoseats.jpg

2. Blitz fixed bucket racing seat. As you can see in the pic one bolster has been patched. Seat is fixed but has a cool "reclining" feature, you can adjust the angle of the bucket. Its a bit dirty as I actually used it for track days and such, excellent seat. 100 Firm.

http://img.photobucket.com/albums/v645/carthik/IMG00051-20100713-0909.jpg

3. Cusco Rear Strut Bar. Somehow someone got some paint on it as you can see from the pics, should clean off just fine. 110 Firm.

http://img.photobucket.com/albums/v645/carthik/IMG00093-20100731-1105.jpg

4. Cusco Lower Arm Bar. Great Shape. 75 Firm.

http://img.photobucket.com/albums/v645/carthik/IMG00086-20100731-1102.jpg

5. Swift Springs 8/6k. Great shape, uncut. Minor surface rust from regular use. 400 OBO.

http://img.photobucket.com/albums/v645/carthik/IMG00085-20100731-1102.jpg

6. Greddy Oil Catch Can. Great Shape. 80 Firm.

7. Whiteline Swaybars front and rear. Used. Good working condition. All mounting hardware included. 300 Firm. Pics to come.

8. Vertex Fiberglass Front Bumper. Brand new, never used. Its a knockoff. 250 OBO.

http://img.photobucket.com/albums/v645/carthik/IMG00058-20100713-0910.jpg

9. Brand New never mounted Origin AE86 Hatch Wing. 150 Firm.

http://img.photobucket.com/albums/v645/carthik/IMG00093-20100731-1105.jpg

http://img.photobucket.com/albums/v645/carthik/IMG00094-20100731-1105.jpg

10. Ray's Engineering Volk Racing Aluminum 3 Piece Mesh Wheels. Some curbing on them. Faces are MINT. 15", forget width, have to double check, between 7-8". Unsure of offset but I will post a pic of numbers I found on the back, maybe you guys can make sense of them. 1500 OBO.

http://img.photobucket.com/albums/v645/carthik/IMG00099-20100731-1107.jpg

http://img.photobucket.com/albums/v645/carthik/IMG00100-20100731-1107.jpg

11. Pair of Advan Oni 15x7.5 -5 offset. Amazing condition, fits amazing. 450 OBO.

http://img.photobucket.com/albums/v645/carthik/IMG00059-20100713-0910.jpg

12. Brand New Nardi Classic. 330mm. Used for maybe a few days at the most in my car. Mint condition. the horn button and center ring are 100% new as I had those parts from my old nardi for when I installed this wheel in my car. Comes with all original packaging. 300 OBO. Pics to come.

13. Rear 4 links with Brand New poly bushings installed, never used. 100 OBO. Pics to come.

14. Brand New Origin Fender Flares. Atleast that's the brand they look like to me. Copies. 150 OBO.

http://img.photobucket.com/albums/v645/carthik/IMG00103-20100731-1110.jpg

15. TRD Short Shifter. Great Shape. 250 Firm. I don't care how cheap T3 is and how much better you think it is. This is a genuine and rare TRD shifter. If you don't like the price go buy T3. pics to come.

16. Brand New Megasquirt MS1 v2.2 with relay board. Includes FULL EDIS IV setup ( 32-1 T3 timing gear mounted, VR sensor ( mounted), Accel EDIS pack and NEW custom made EDIS to 4A 8.5mm magnacore wire. Need to figure out a price, these parts add up quick. If your interested send me a pm. Pics to come.


I won't be adding any more parts to this thread. When I get around to it the other parts will get their own thread. I might consider discounts if you take more than one part.

Thanks for looking,

Carthik

theinfamous1
07-31-2010, 03:51 PM
who made the URAS replica?

leboe
07-31-2010, 03:52 PM
Interested in sway bars. How much to ship to v1b 3m1 Vernon bc?

rollin_sideways
07-31-2010, 04:29 PM
How much to ship bumper to t8a4j9?

666
07-31-2010, 05:05 PM
damn, interested in sway bars as well.

mhiscott
07-31-2010, 06:11 PM
offset and width on the wheels?

Roxer
07-31-2010, 10:00 PM
omg someone needs to jump on those advans before I do!

carthik2
08-01-2010, 09:28 AM
I thought the bumper was vertex? To be honest I don't know who made it. Its a typical fiberglass bumper, nothing special. Will get quote for sway bars tomorrow. Will get quote for bumper tomorrow (keep in mind packing the bumper means costs for supplies, thats a lot of bubble wrap. Last time I shipped a bumper I think it was only like 70 bucks through greyhound and it went way out west. However the guy also paid me to have it professionally packaged at fed ex because he didn't want it damaged). mhiscott I will get the size of the volk's tonight. Roxer you know you want them!, I will try and find a pic of them mounted to convince you, lol.

Bump. Will try and update the missing pics tonight.

Carthik

Jehuty77
08-01-2010, 09:37 AM
Holy Nice Parts

carthik2
08-01-2010, 09:39 AM
Holy Nice Parts

Yes, you should buy some!

Jehuty77
08-01-2010, 09:49 AM
Blitz seat, is it on 86 rails?

Might hit you up on some stuff once i take care of the vibrations i my car

carthik2
08-01-2010, 09:56 AM
its on sw20 rails right now that is not included in the price. But I made it work for quite a while, sits a bit crooked and only 3 holes line up, lol. I would suggest finding a real ae86 rail, or simply modify your stock seat rails as its free, very easy to fabricate from stock rails and mounts and works fine. Go fix the vibration now! plus there is no need to worry about expenses, its just the drive shaft.

roblee
08-01-2010, 11:31 AM
how much for the motor son.trigger happy get those flares?

JOshua a
08-01-2010, 12:59 PM
are those flares for the 86?

thumper
08-01-2010, 03:59 PM
omg someone needs to jump on those advans before I do!

If they were a set I would be. I need some rims for my hatch.

carthik2
08-02-2010, 09:01 AM
motor not for sale right now boss. If I do sell it will be partout, won't get my money back selling like that all purty... Josh wants flares, and thumper run staggered rims, be cool like that.

I will try to return everyone's PMs tonight.

Carthik

RONG
08-02-2010, 02:29 PM
OH EM GEE~!!!:drool5: its local too

roblee
08-03-2010, 12:22 PM
How much for the motor my man.i will get a loan. Send me a pm.i want it for my 69 sprinter.

carthik2
08-03-2010, 03:54 PM
so I'm a retard, couldnt get anything done over the long weekend (I didn't know it was one). Will try to get everyone their quotes by tomorrow evening. Rob, we'll talk about the motor.

Cusco Lower Arm Bar Sold. Everything else still available. Bump.

Special K
08-04-2010, 02:56 PM
egine is purrdy

GEEROME
08-04-2010, 09:35 PM
yes the motor looks real good........

jerome