PDA

View Full Version : Parts other things, cheap/free.



DiscoQuinn
07-12-2011, 10:33 AM
All parts, just make an offer. :)

Subbox:
http://www.usedvictoria.com/classified-ad/Two-MTX-6000-12-Subs-in-Bassworx-Box_14965042

Sparco Reclinable:
http://www.usedvictoria.com/classified-ad/Sparco-reclinable-seat_15242989

Kirkley aluminum race seat:
http://www.usedvictoria.com/classified-ad/Kirkley-aluminum-race-seat_15242990

Racing Beat Holly carb 13 manilfold:
http://www.usedvictoria.com/classified-ad/13B-Rotary-Racing-Beat-Holly-Carb-manifold_15242994

Miata Coil packs:
http://www.usedvictoria.com/classified-ad/Miata-coil-packs_15242996

volkswagon clutch flywheel, fairly new.:
http://www.usedvictoria.com/classified-ad/Volkswagon-18-Clutch-flywheel-and-pressure-plate-lightly-used-_15242998

4ag parts:
http://www.usedvictoria.com/classified-ad/Toyota-4AG-engine-parts_15243003

two 13b engines:
http://www.usedvictoria.com/classified-ad/Two-Mazda-13b-Engines_15243005

4ag blue top rwd:
http://www.usedvictoria.com/classified-ad/Toyota-4AG-engine-_15243006

Miller Arc Welder, 220v:
http://www.usedvictoria.com/classified-ad/220v-Miller-Arc-Welder_15243007

220v Kiln:
http://www.usedvictoria.com/classified-ad/220v-small-industrial-Kiln_15243011

I have tons of Corolla parts for free/donation. Please come grab them, ASAP. They need to go this week, or they may end up in scrap.

http://farm7.static.flickr.com/6006/5930942758_8c631c789e_b.jpg
http://farm7.static.flickr.com/6124/5930386789_0429639113_b.jpg
http://farm7.static.flickr.com/6129/5930944018_10e641c32b_b.jpg
http://farm7.static.flickr.com/6137/5930944632_d730590fc1_b.jpg
http://farm7.static.flickr.com/6026/5930388723_cc2087fb2d_b.jpg
http://farm7.static.flickr.com/6022/5930945732_f3dd6f398c_b.jpg
http://farm7.static.flickr.com/6141/5930946308_8838179a0e_b.jpg
http://farm7.static.flickr.com/6009/5930947022_d5ce2a0dc6_b.jpg
http://farm7.static.flickr.com/6135/5930947638_b4c3815153_b.jpg

discoquinn@gmail.com 250-483-1315

Hachi-Go
07-12-2011, 11:26 AM
http://farm7.static.flickr.com/6022/5930945732_f3dd6f398c_b.jpg

are those struts on the left with the red adjustable sleeve handles, in decent condition?

DiscoQuinn
07-12-2011, 12:00 PM
They are not. They are only useable for the spindles. Someone decided to weld aluminum collars onto steel casings. It almost worked, had they not have blown through the strut top threads.

Duy-
07-12-2011, 12:04 PM
lol i like that painted driveshaft, too bad our cars are low too to see it in action

Rastaracer
07-12-2011, 01:03 PM
I see that auto tranny I sent over there wasn't put to good use...FTL

shancerlelby
07-12-2011, 01:14 PM
dude i want the sparco, you gots pm

DiscoQuinn
07-12-2011, 01:14 PM
Yes Trevor, 99% of this stuff is stuff people have donated. I feel horrible.

shancerlelby
07-12-2011, 01:26 PM
okay so you've got lots of pms so i havent sent you one. More than my wife at that time of the month...

Blade7
07-12-2011, 01:32 PM
Man, I wish I was closer! I would trade for a few things.

DiscoQuinn
07-12-2011, 01:33 PM
PM's cleared. Sorry if it was full.

Colbskee
07-12-2011, 01:41 PM
ill take my foglights back haha and you should give me the 13b's with the carb manifold :) im kidding mostly.. but i do want the fogs back

sharpe_corners
07-12-2011, 05:37 PM
I want the gtst steering wheel!

imbroglio
07-12-2011, 10:36 PM
axels zenki or kouki

Trigger Happy
07-12-2011, 10:39 PM
axels zenki or kouki

They look like SR5 axles due to the skinny bearings, however you can still use them as Zenki axles, the spline diameters are identical.

DiscoQuinn
07-12-2011, 10:43 PM
all E7 axles, not really willing to ship.....

666
07-12-2011, 11:08 PM
They look like SR5 axles due to the skinny bearings, however you can still use them as Zenki axles, the spline diameters are identical.

the splines are all that is the same, the rest is different = wont work as GTS Zenki's

visean
07-12-2011, 11:17 PM
Do you have any charcoal canisters? I want to reinstate one in my car

DiscoQuinn
07-12-2011, 11:20 PM
None! :)

visean
07-12-2011, 11:23 PM
doh!

Trigger Happy
07-13-2011, 12:17 AM
the splines are all that is the same, the rest is different = wont work as GTS Zenki's

Today I learned something. Just curious, if you change out the SR5 bearings to GTS bearings would they work then? Is it an issue of the bearings outer diameter alone? Or is the diameter of the axle where the bearing sits different as well?

Blade7
07-13-2011, 12:50 AM
I just pulled an SR5 rear end, the outside diameter looks the exact same... Actually I know it is because my GT-S backing plates fit the same way on both. I never really compared them in any other ways, but the axel housing looks identical to me...

666
07-13-2011, 07:13 AM
the part where the bearing presses on is shorter on the SR5/TE72 vs AE86 GTS axles. anyways this is getting off topic, sorry quinn.

Warren
07-13-2011, 08:20 AM
I want all the e7 axles.

666
07-13-2011, 09:32 AM
I want all the e7 axles.

I would like at least a pair:)

jay whit
07-13-2011, 02:13 PM
ill buy it all the 4age parts fwak ill buy it all.

Colbskee
07-13-2011, 02:35 PM
http://farm7.static.flickr.com/6124/5930386789_0429639113_b.jpg

Is that a rotary muffler? If so.. I want it!

coldstar64
07-13-2011, 03:00 PM
The t50 and 4age stuff is spoken for ;o)

jay whit
07-14-2011, 09:06 AM
come on dq call me ill buy the cars to ....

Jimmym
07-14-2011, 10:30 AM
Any 4x100 wheels?

Adam134
07-14-2011, 09:22 PM
How much for the spindles? So I can finally put my coilovers to use

XIIIth
07-15-2011, 11:51 AM
In the 9th picture from the top on the original post, I think there's a black electric fan with shroud sitting towards the back. Would that fit on an ae? and does it have a temp sensor?

thanks!

Cbergerud
07-15-2011, 02:44 PM
Quinn has a lot on his plate right now, I don't think shipping is in the cards.

DiscoQuinn
07-17-2011, 12:37 PM
For those of you not in the know here's a little update:

I had run out of money the last Saturday. Some surprise costs emptied the little money I had stored away. With no prospects of work or support I began to prepare to return to Ontario. After a few strings pulled I found some work on Thursday morning. With this new job I had the promose of keeping my stuff and finally being able to start paying off the trailer. However on Thursday night I was removed from my home, on a surprise visit from my Ex-girlfriend. Without anywhere to store the parts, little money in pocket and now suddenly couch surfing down in town, I am forced to liquidate my belongings to help simplify and fund building a new life. I've started working, but until I begin to get the cash flow from the job I am scrounging little bits of cash from the few objects I can. Although I am getting out of cars for a brief moment, I am still working with them, and will be around all my friends with them. It will be a short period, but I need a break to catch up on everything else.

The wagon and blue are for sale. I do not want to sell them, but please don't let that stop you from buying them.

The wagon is a 12a rotary swap, with ae86 struts/brakes, tokico blues, power knuckles, true manual rack with manual cross member and brackets, AE71 steering column, welded diff, sparco sprint Jr seat, my steering wheel I brought back from japan. It runs and drives, but needs improvement. The last track day really showed me all the flaws of the build, so if I actually end up selling it, there is an easy short list of how to make it work even better.

Blue is the cleanest car I've ever built, and although she is having problems there is still a full set of supras, extra long lower control arms with matching custom tie rods. full AE71 steering column setup, rare E7 sport cluster with a tach, a clean T50 with a hard to find 4ac bellhousing, bolt in ae86/ae71 clutch pedal assembly, fairly fresh 3ac, Ae86 front struts/brakes, GTS steering wheel, clean title and a usable shell.

It hurts to have to get rid of the things I built with the favors and help of my good friends. I sincerely apologize to everyone who has given me a favor with my cars, and the corolla parts collections. I do not feel good about this, but I am faced with no other option. I do not know what parts remain, I am unsure, but I believe someone is picking up most of the parts this afternoon. However, there will be a few left that I will bring with me to hope sell off. I will build a new post for those items. Thank you for your time. If there are still parts you want, express interest. I cannot guarantee that they are even still available, but depending on who comes to grab stuff today, they may sell/give them away, it is up to them.

DiscoQuinn
07-19-2011, 12:07 PM
95% of the stuff is gone. Huge thanks to Mike Day (Coldstar64) and Andrew Tower for coming over, grabbing the stuff they wanted and helping clear the rest of the scrap. I know a few others came by and grabbed things when I wasn't around as well, thanks to them too. There are still a few parts left I have squirreled away that will be up for sale.

I feel really bad ditching the parts people have brought me, but I had no other choice.

Both cars are still for sale, and viewable in Victoria.

jay whit
07-19-2011, 12:29 PM
ill buy the wagon