PDA

View Full Version : ssr formula mesh staggered set 15 inch w/falken tires $600



Oldcore
11-02-2011, 07:22 PM
sold. thanks

666
11-02-2011, 07:46 PM
width/offset?

Brenty
11-02-2011, 08:27 PM
what he said

Oldcore
11-02-2011, 09:07 PM
I'll find out that tomorrow..

blackaspitch
11-02-2011, 11:14 PM
ditto /\

Oldcore
11-03-2011, 06:49 PM
if Im not mistaken width is 8.5
offset is +20

celica-fiend
11-03-2011, 07:58 PM
I think you're mistaken.. 205/50 on an 8.5" wheel is going to be stretched a lot more than that..

If you're not sure.. check online for pictures on measuring wheels properly.. it isnt from outside edge to outside edge..

Brett

666
11-03-2011, 08:47 PM
My guess is 7.5 or 7.

PandaCoupe
11-03-2011, 11:16 PM
SSR's have a sticker with all this info on the barrel unless someone removed them from all four?

Oldcore
11-04-2011, 05:55 AM
ya sticker isnt there anymore

666
11-04-2011, 10:28 AM
Best way to measure up rims with tires still on them is from outside lip to outside lip then subtract 1". Then for offset measure for backspacing then covert to offset, as backspacing takes in to account the extra .5" on the back lip.

https://www.rsracing.com/images/tech-wheeloffset.gif

Edit: Backspacing is measured off of the back lip (say a straight edge) to the rim mounting surface.

blackaspitch
11-04-2011, 12:36 PM
I think you're mistaken.. 205/50 on an 8.5" wheel is going to be stretched a lot more than that..

correct, 205mm = 8"...it doesnt look flush thou, 7/7.5" is my guess as well

Oldcore
11-07-2011, 06:29 PM
sold to 2low
enjoy buddy!

REN69
11-07-2011, 06:33 PM
mesh whore... crack whore? lol

2low
11-07-2011, 08:42 PM
all your mesh are belong to ME!!!! WAHAHAHA