PDA

View Full Version : F/S : 20V ST/BT wiring Service



kpsxtyone
06-21-2005, 10:16 AM
Hello Guys and Gals :)

I?m now going public on what I can do for the wiring conversion to 20V Blacktop or Silvertop for AE86, KP61, SR5 (any other non EFI converting to 20V)

I do an great job, all wires are SOLDERED and shrink tube No tapes over soldered connections. I also will use plastic wrappings for the wires to make a brand new look but mostly to have a clean job. I will also clean the plugs so no GREASE :lol: I have the car to actually check the ECU if it is working properly or not.

If you want custom colors for the plastic wraps (RED, BLUE, YELLOW) will be extra for the actual material or you can actually supply me with the plastic wraps to use if you have other colors in mind

Best situation provide me with
- complete wiring harness off the engine
- complete wiring harness off the 16v ( I just need the engine harness not engine compartment harness)
- BT/ST ecu (depending on your conversion, make sure you have all plug on the ECU)
- Existing 16 ECU (I will need this to make a plug and play plug that connect to you existing 16v plug on the passenger side kick panel, this eliminates the need of splicing wires but u do sacrifice your 16 ecu) (optional)

Worst Situation, provide me with
- Cut harness
- as long as you have most of the wires, plugs to the coil, igniter, injectors, AFM (for ST), plug to the MAP sensor (for BT), distributor, ECU water temp plug (usually connected at water housing, knock sensor plug, VVT plug
- ECU with all 3 plugs
- Existing 16 ECU (I will need this to make a plug and play plug that connect to you existing 16v plug on the passenger side kick panel, this eliminates the need of splicing wires but u do sacrifice your 16 ecu) (optional)
- complete wiring harness off the 16v ( i just need the engine harness not engine compartment harness)

NON EFI to EFI conversion
- Same as specified on both situations
- I will make a custom relays for Fuel pump, power for ECU

Please feel free to ask around the forum for the quality of what I do.

PM me or email me at kpsxtyone@yahoo.ca for more details

Thanks
Ryan

Here is a sample of a complete 20V Silvertop harness
http://ca.geocities.com/kpsxtyone/wiring/wiring_1.jpghttp://ca.geocities.com/kpsxtyone/wiring/wiring_2.jpg
http://ca.geocities.com/kpsxtyone/wiring/wiring_3.jpghttp://ca.geocities.com/kpsxtyone/wiring/wiring_4.jpg
http://ca.geocities.com/kpsxtyone/wiring/wiring_5.jpg

Here is a sample of a complete 20V Blacktop on my KP61
http://ca.geocities.com/kpsxtyone/wiring/kp61_1.jpghttp://ca.geocities.com/kpsxtyone/wiring/kp61_2.jpg

SuprltvCnspircy
06-21-2005, 06:01 PM
will you do a harness for a gze to run megasquirt in an 86?

stuvy
06-22-2005, 01:03 AM
That is gorgeous. I love your car. Bump for some good wiring.

kpsxtyone
06-22-2005, 08:21 AM
SuprltvCnspircy
Unfortunately I cannot market the Megasquirt to GZE for I am working on one right now. I want to do some testing before I say yes.

stuvy
thanks for the bump :)

micro214_kp61
06-22-2005, 08:31 AM
That is gorgeous. I love your car. Bump for some good wiring.

that was his old set-up.. here's now! (just to show you guys that this guy is the real deal! :D )

http://img.photobucket.com/albums/v175/downshift/P1000840.jpg

REN69
06-22-2005, 02:16 PM
3SGTE BABY!! Ryan's car is so shhhhweet! :D

I still think he should've gave me his 20V. :p

SuprltvCnspircy
06-22-2005, 03:08 PM
well just let me know when your ready to make a gze harness and ill deffenately take one off yah...

projectae86
06-23-2005, 03:14 AM
bump a rump for this guy. very fast with info and a responce. and i just came back to look at his pictures and they are almost as sexy as a set of rims a friend of mine has recently come into. lol ( i love secrets) anyhoo wow
so what else besides your harness do i need to buy for my 86 to make the engine bay look sooooo clean/ bare?

kpsxtyone
06-23-2005, 10:16 AM
Thanks !

actually the car was repainted the car 4 years ago and use spray can for the engine bay.. evertime i do a swap i just try to paint the engine components as much as i can.. and yeah i rewired the whole engine bay so that the wires are running inside the fender :) Now that u have to bring ur car to my house :) if i had enuff money id open a shop but then this is my hobby :)

Thanks
Ryan

GTS Jeff
06-23-2005, 03:32 PM
I'm wondering if you can help me out. I drive a zenki AE86 with a smallport 4ag in it. I'm currently using the old bluetop electronics with the smallport injectors spliced in. I have a JDM smallport ECU and I have a cut, FWD, JDM smallport harness as well. What are we looking at for getting the smallport electronics into my car?

Brian
06-23-2005, 04:15 PM
What are we looking at for getting the smallport electronics into my car?

You'll have to do hardware mods too. The knock sensor needs to be installed, and the water piping to the back of the waterpump will need to be modified, as it occupies the space for the knock sensor.

kpsxtyone
06-28-2005, 08:46 AM
bumps

kpsxtyone
07-05-2005, 07:12 AM
bumpy

kpsxtyone
07-08-2005, 07:42 AM
- another successful install took around 2 hours
- 3 turn overs and started running

New option
- relay circuit to power those radiator fans

thanks
Ryan

Fabius
07-08-2005, 01:34 PM
- another successful install took around 2 hours
- 3 turn overs and started running

New option
- relay circuit to power those radiator fans

thanks
Ryan
your the greatest man, seriously i heard your work was good but not this good.
damn i wanna hugh you and kiss you hahahah j/k
great work let me know when your up for installing the other things ;)

kpsxtyone
07-11-2005, 11:35 AM
Thanks for the compliments Fabius ! Oh yeah i still have to take some pix :)

when i have some time man ill install the other stuff ...

thanks
Ryan

the_morbidus
07-11-2005, 12:23 PM
wow i didnt know you lived in mississauga, so close!!!
i was desperatly looking for a running 4age to replace my old one....and i've had no luck trying to find it....

well since u do the megasquirt conversions for the 20v's, just a question, would u do the 20v conversion on my ae86 if i payed you??? if yeah then how much would u want??

i live here in toronto, my car doesnt run...so i would have to tow it to your house hehehe.....anywyas just email me!!!

the_morbidus@hotmail.com

or call me at 416 388 3655

btw they call me Fred, name is Frederico but errr....bit big.

kpsxtyone
07-12-2005, 08:10 AM
Hi Fred,
Unfortunately i dont do MS conversions for 20V all im offering right now is the wiring service to convert your existing 16V or SR5 to 20V.

But if you are interested in the 16V to 20V wiring service let me know :)

For the actual engine transplant check with Fabius on who did his car maybe he can work on your car too for a decent fee and i will send you the moded wiring harness to install If you want me to install it then we have to talk :) I dont have any space in my garage man .. :)

Thanks
Ryan

the_morbidus
07-13-2005, 09:35 PM
well i tryed to contact Fabius but no pm replied.

i have money, what u think the entire cost would be including buying the engine?? because i have none at moment.

i basically just want to make the car run, i wanted to put a 4age red top into the car jus to run but i've had no luck finding any 4age engine so far......sinc ei was thinking on putting a silver top next year then i thought....damn i should jus put one now and not waste money 2 times.

well i have some space im my garage....just tell me what u think k??

Fabius
07-14-2005, 12:51 AM
well i tryed to contact Fabius but no pm replied.

i have money, what u think the entire cost would be including buying the engine?? because i have none at moment.

i basically just want to make the car run, i wanted to put a 4age red top into the car jus to run but i've had no luck finding any 4age engine so far......sinc ei was thinking on putting a silver top next year then i thought....damn i should jus put one now and not waste money 2 times.

well i have some space im my garage....just tell me what u think k??
im sorry i didnt replay your message kinda threw me off a bit...
you can find red tops for $400
ST $400 - $1000 depending on what comes with the engine.

think long and hard on what you really wanna do man.

the_morbidus
07-14-2005, 12:47 PM
damn sorry Fabius, didnt mean to confuse you, i broke my engine.....theer goes a piston rod ahahaha and its also running at half compression, its a rebuilt engine for what the previous owner said...i dont hvae time to fix it so i jus want to trow in another engine.

looking for something reliable, can handle some rough driving....maybe drift practice to a few times a week, that doesnt have much kilometres on it to, doesnt need much HP but enough to keep the drift going for a while, and basically i want to make my car run as soon as possible so i can send it in to body fix once the body kit arrives.

to what i thought the silver top was pretty much the closest match to my needs, would also apreciate other opinions to, but mmmmm i've been looking for red tops for a while and no luck....around 3 weeks.....maybe i just havent looked in the right places then.

any help is apreciated.

btw sorry for screwing up you thread ahhaaha.

kpsxtyone
07-18-2005, 01:47 PM
hey give email me and will talk

I you have all the parts My dad and I can finish the swap in 2 weeks.. Will make a package for you.

thanks
Ryan
kpsxtyone@yahoo.ca

kpsxtyone
07-20-2005, 01:45 PM
emails replied too....

kpsxtyone
07-31-2005, 09:56 PM
Hi, my email kpsxtyone@yahoo.ca is having problems and Yahoo is currently trying to fix it. I have lost access since the 20th.

Please forward all emails to luna3007@rogers.com if you have sent me an email and have no response please re send it

Thanks
Ryan

kpsxtyone
08-01-2005, 12:25 PM
Hi ,
As of AUG 1 my kpsxtyone@yahoo.ca is now operational. I will start replying to all emails asap

thanks
Ryan

20vTOFUCAR
08-01-2005, 03:43 PM
he is simply the best... the wiring master... he did a silvertop harness conversion for me last year and it was better than perfect.... now he's doing a blacktop harness for me and i just can't wait.....


:D yipppppiiiieee :D

kpsxtyone
08-08-2005, 05:23 PM
Another happy customer :)

get the orders comming.....

thanks
Ryan

kpsxtyone
08-10-2005, 12:30 PM
emails replied too...

kpsxtyone
08-26-2005, 01:33 PM
another happy camper

AE92 - 20V ST

The VidKid
08-26-2005, 01:55 PM
You will be the go-to-wiring-guy when I finally decide what kind of swap I want to go with.

Throw up some pics of the AE92 20V swap! :)

kpsxtyone
08-26-2005, 02:25 PM
Hi VidKid,
i just did the wiring conversion not the actual swap :) but im working on my AE-92 redtop to 20V BT in a week :)

Later,
Ryan

The VidKid
08-27-2005, 06:10 AM
Yes, yes, I know. :p That is why I said the "go-to-wiring-guy". :) I want to see the pics of the AE92 swap, after you cleaned up the wiring. :) I want to see how it looks. :)

kpsxtyone
08-29-2005, 11:43 AM
20vTOFUCAR - 20V Blacktop - DONE ! :)

VidKid
once i get the time to finish mine.. ill take pix :)

later
Ryan

The VidKid
08-30-2005, 05:39 AM
Damn. 20V BlackTop awesomeness. :) You're awesome!

martiniracing
08-30-2005, 11:00 AM
ryan is the king of wiring!!! WIRING TEN GOKU! btw people, he guided me on my 20v harness for silvertop

sam

kpsxtyone
08-30-2005, 01:32 PM
Thanks Guys !!!

ryan

kpsxtyone
09-01-2005, 01:32 PM
Here are some pix of the job i do for the Wiring Service

Here is an AE92 (88) harness stripped and cleaned
http://ca.geocities.com/kpsxtyone/wiring/AE92_stripped.jpg

Sample of connecting a cut wire for the dizzy
http://ca.geocities.com/kpsxtyone/wiring/dizzy_before.jpg
http://ca.geocities.com/kpsxtyone/wiring/dizzy_after.jpg

We gotta get rid of that nasty tape :)
http://ca.geocities.com/kpsxtyone/wiring/knock_1.jpg
http://ca.geocities.com/kpsxtyone/wiring/knock_2.jpg
http://ca.geocities.com/kpsxtyone/wiring/knock_3.jpg
http://ca.geocities.com/kpsxtyone/wiring/knock_4.jpg
http://ca.geocities.com/kpsxtyone/wiring/connection.jpg

Emails replied too... Keep them comming :cool:
Thanks,
Ryan

The VidKid
09-02-2005, 05:16 AM
Wicked Hot!!! That's awesome stuff, man. :) Cleaned up those wires very nicely. :)

micro214_kp61
09-02-2005, 02:07 PM
Ry, thanks for solving my 3 year problem with the 20V! ;)

kpsxtyone
10-31-2005, 04:54 PM
bumpy

The VidKid
11-01-2005, 04:12 AM
Ry, thanks for solving my 3 year problem with the 20V! ;)

What was the problem??? :confused:

kpsxtyone
11-24-2005, 04:54 PM
All emails replied to

thanks
Ryan

20vTOFUCAR
11-24-2005, 06:04 PM
BUMP!!!...my car is running amazing!!!...Ryan is A wiring-GOD!!!!!!!!!! :D

kpsxtyone
05-09-2006, 05:23 PM
emails replied too...

thanks !

kpsxtyone
02-17-2007, 05:08 PM
bumptydumpty...