Parting Out 7AGTE Build $3,000 (See Below)

[Lynk444]

I will not sell anything until the bottom end sells.

If you would like me to put your name next to an item I will contact you if the bottom end sells. I will put all interested parties next to the item and the first person or highest bidder will get the item. You will have to pay for shipping or pick it up locally. I'm in AZ. If you want everything below I will sell it all for $3500 obo not including the turbo or $4500 including the turbo.

Long Block $2,500 obo ? I will include the intake with the 550cc injectors. If you dont want that I will negociate. The long block comes with ported cylinder head, trd valve springs, titanium valve spring retainers, stainless steel valves, shim-less buckets and shimmed buckets (your choice), cometic head gasket, blue top cams, arp studs, eagle h-beam rods, JE Pistons new Toyota bearings, New Toyota shimmed oil pump, modified oil pan for ae86, chrome molly custom flywheel, Toyota water pump and housing, 944 timing belt, stock blue top cam gears. I have receipts that add up to way over this and the engine is completely build and brand new. Email me if you want to see the receipts at allengriffy@yahoo.com

Bottom end $1500obo - Will include oil pan, oil pump, all bearings, rods, 944 timing belt, Pistons, arp studs and 13lbs Custom Chrome Molly Flywheel that fits a 212mm disc.

Head with intake 1,000 obo - Will include Stainless steel valves, trd valve springs, shimless buckets and shimmed buckets, titanium valve spring retainer, Mildly ported, and the 550cc injectors.





After Block Sells:

TVIS Delete Plate - $120 obo ? this is a modified stock plate that has had the plates removed and holes welded up.

NEW 550cc injectors and 4age fuel rail with pressure gauge A&N fittings $350 obo. Will connect to stock gt-s harness


NEW Cast HKS Manifold - $200 obo.



AEM adjustable cam gears - $200 obo.



Custom Valve Covers with TRD oil cap - $110 obo.

Blue top intake manifold w/ throttle body ? Make an Offer

4age belts new from Napa ? Make an Offer

Brand New Toyota A/C compressor for 4age - $300 obo.


High output alternator for higher amperage over stock blue top - $150 obo

Rebuilt P/S pump with new pulley - $100 obo.

GT28RS Disco Potato Turbo - $1,000

I have a ton of emissions stuff and other things so send me an email (allengriffy@yahoo.com) if you are looking for something specific and I'll add your name and part to the list.

The sooner I sell the block the sooner other parts become available. The buyer of the block has the first option to buy any and all associated parts for a discounted price and the turbo. Tell your friends and help me move this build.

[Sora]

I am intrested in some parts let me know when the block sells

[Lynk444]

I am intrested in some parts let me know when the block sells

Sounds good. Help me find some one to buy the block and I'll give you priority on the parts...

[REN69]

AZ as in Arizona? You might have a hard time selling on a 99% canadian forum.

[Lynk444]

Yeah, as in AZ. but I am more than willing to ship.

Wow you Canadians have way awesome Emoticons.

[apharmdb]

Go to where Toyota freaks congregate. I've met Allen as I'm on a contract in AZ right now and would buy this if my car didn't take track beatings on a regular. GLWS.

[TTC]

Who made your flywheel.

I would take the flywheel and bottom end. I have no need for the rest, Just a thought. Did you use vitz buckets, kinda a shame to put shimless buckets and not upgrade the cams to match them

[Rob.K]

Who made your flywheel.

I would take the flywheel and bottom end. I have no need for the rest, Just a thought. Did you use vitz buckets, kinda a shame to put shimless buckets and not upgrade the cams to match them

uh oh Tom will be all over this.

[Lynk444]

Who made your flywheel.

I would take the flywheel and bottom end. I have no need for the rest, Just a thought. Did you use vitz buckets, kinda a shame to put shimless buckets and not upgrade the cams to match them

The flywheel was made by a local machine shop. They went out of business. The Engine has been in storage for about a year and a half. Bigger cams were in the works but opted not to get them until the engine was set up. The buckets are from anther Toyota engine. There is a guy in California that sells them.

I will sell you the bottom end and flywheel. Did you want the head to or no? There are ARP studs on the block and head gasket is put on and torqued. I would be more than happy to email you pictures of the receipts that I have. The flywheel cost about $750 to make so it is not a cheap part.

Shoot me an email and let me know.

Cheers,
Allen

[Lynk444]

Bump.

[TTC]

I have no use for the head, i have a bluetop, redtop and ST head of my own to use. All I would want honestly is everything from the head down. Sadly that flywheel is prolly not much use to me since im using a wbox and a 230mm flywheel. The rinkydink 200mm ones aren't much use to me.

[Lynk444]

I have no use for the head, i have a bluetop, redtop and ST head of my own to use. All I would want honestly is everything from the head down. Sadly that flywheel is prolly not much use to me since im using a wbox and a 230mm flywheel. The rinkydink 200mm ones aren't much use to me.

I can double check but I think it will take the 212mm gz clutch plates. I can measure it when I get home today and let you know. I have an ACT clutch kit as well that you can use for a GZE if you're interested.

You don't need a high output alternator, do you? I will include the brand new toyota water pump and housing for you to use.

Like I said in the post if you buy the block you get first dibs on other parts so hit me up with what else you might need because I likely have it...

[Lynk444]

Bump

[TTC]

Yeah check will ya.

[Lynk444]

Yeah check will ya.

Its the 212mm disc.

[Lynk444]

Okay some one needs to jump on this...

[Lynk444]

Bump.

[Lynk444]

Bump for lower prices.