Page 8 of 15 FirstFirst 123456789101112131415 LastLast
Results 141 to 160 of 290

Thread: Elizabeth

  1. #141
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    Took coilovers off

    took rotors off ~ remove cap, pin, 3/4" nut and 14mm bolts.

    clean well ~ I used gun wash.

    knock races out via the slots with a hammer and punch plus removed the old nasty bearings.

    grossness ~ save old races to push new ones in with and saved the seals they never go bad.

    let paint dry over night and went for a sushi nsupper.

    and threw a seat in for good luck.

    do more stuff tmrw.
    Last edited by LastLatvian; 08-27-2012 at 10:35 PM.

  2. #142
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    t3 stuff doesn't fit very oem, I am told oem caster at the camber plate is the business.

    flip'd the t3 stuff ~ making it closer to oem caster.

    put the camber plates on backwards ~ thanks paul for the chopped up tops strut hats.

    new sfk bearings packed with new rotors.

    next every bushing gets pulled to be replaced - more fun.

  3. #143
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    bleh i hate 4 links & supra celica rear ends when trying to fit ae86 traction brackets.

    tach works kinda ~ alternator or battery is dead now




    spray your coilovers so they don't bind to the collar.
    need more angle still ick.

    just about done today more moving and finishing e-brakess

    Quote Originally Posted by woodenturn View Post
    DK should ban such nonsense. 2 cents~ sr86 www.dorikaze.net/showthread.php?32933-Elizabeth

  4. #144
    Join Date
    Mar 2004
    Location
    Calgary
    Posts
    2,614
    hmm needs more Jig-A-Loo. (haha wtf?!)
    "mmmango!"

  5. #145
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,346
    That was xtof's product placement... now we're all going to go get some because he uses it!
    Quote Originally Posted by b-rock View Post
    -1 for mean spiritedness.

  6. #146
    Join Date
    Apr 2011
    Location
    Calgary
    Posts
    10
    9/10 gigolos use jig-a-loo for personal lubrication

  7. #147
    Join Date
    Mar 2009
    Location
    Richmond Automall
    Posts
    644
    Hahahaha nice one ^^^

  8. #148
    Join Date
    Jul 2005
    Location
    Chilliwack, BC
    Posts
    861
    The reason your T3 camber plates did not fit is there are 3 different variants, you did not specify which you had.
    | www.CellBlockD.org - Vancouver Area Drift Events | www.driftsafari.com |

  9. #149
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    Quote Originally Posted by bmx269 View Post
    The reason your T3 camber plates did not fit is there are 3 different variants, you did not specify which you had.
    what do you mean 3 different vairants? I have t3 ae86 camber plates, if you look at the stock strut mounts the top plates put the caster further towards the back of the car. I filped my left and right camber plates so that they'd have a closer to stock gts strut hat caster location. By doing this I had to drill a new hole for the third bolt to sit in.

    Quote Originally Posted by woodenturn View Post
    DK should ban such nonsense. 2 cents~ sr86 www.dorikaze.net/showthread.php?32933-Elizabeth

  10. #150
    Join Date
    Jul 2005
    Location
    Chilliwack, BC
    Posts
    861
    Ok, I am using TE72 specific camber plates with AE86 stuff or the rest.
    | www.CellBlockD.org - Vancouver Area Drift Events | www.driftsafari.com |

  11. #151
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    gosh I hate supra brakes, so odd so old. Thanks Bryan for the help compressing the piston I'd never have guessed that they needed to be turned and compressed at the same time.


    got some new bellows in the mail that should be here next week.

    Quote Originally Posted by woodenturn View Post
    DK should ban such nonsense. 2 cents~ sr86 www.dorikaze.net/showthread.php?32933-Elizabeth

  12. #152
    Join Date
    Nov 2010
    Location
    Beyond the Sun
    Posts
    1,281
    Quote Originally Posted by LastLatvian View Post
    Also will the stock fuel lines on a sr5 flow enough with a 255 pump or should you run bigger lines?
    Super late reply, but when I was consulting Kinsler about my own fuel system they recommended that with a 255LPH pump I would need to upgrade to a -6 feed and return line. I'm assuming you purchased a Walbro? GSS-307?


    Sent from my iPhone using Tapatalk
    Last edited by Serendipity; 10-15-2012 at 04:52 PM.

  13. #153
    Join Date
    Jul 2005
    Location
    Chilliwack, BC
    Posts
    861
    The return only needs to be 1/4" really for a 3/8" (-6AN) feed.
    | www.CellBlockD.org - Vancouver Area Drift Events | www.driftsafari.com |

  14. #154
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    Quote Originally Posted by Serendipity View Post
    Super late reply, but when I was consulting Kinsler about my own fuel system they recommended that with a 255LPH pump I would need to upgrade to a -6 feed and return line. I'm assuming you purchased a Walbro? GSS-307?


    Sent from my iPhone using Tapatalk
    Yeah it's a little late but at the rate I build cars it's not that far off. I do have a -6 return line now. I upgraded everything but my injectors - so it can just swap over to 550s & a disco potato.

    Quote Originally Posted by woodenturn View Post
    DK should ban such nonsense. 2 cents~ sr86 www.dorikaze.net/showthread.php?32933-Elizabeth

  15. #155
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    between midterms I am getting the odd thing done.

    new proper fenders
    E-brake mod I did works awesome, so much leverage , I can lock it up so easy just like a 240sx.

  16. #156
    Join Date
    Dec 2004
    Location
    Calgary Ab
    Posts
    2,649
    What's your ebrake mod?

  17. #157
    Join Date
    Apr 2010
    Location
    Sylvan Lake Alberta
    Posts
    267
    Looking nice, where did u get the bumpers
    85Sr5 3RZ+TH400+8.8 TO B CONTINUED

  18. #158
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    Quote Originally Posted by wonda View Post
    Looking nice, where did u get the bumpers
    Thanks, I got 'em from vancouver.



    Also got a new blower and the heater all jammed in there. Yeah, heat for winter

  19. #159
    Join Date
    Jun 2008
    Location
    Calgary AB
    Posts
    1,322
    All I do is program junk. Imma have to get my ae86 daily'able soon though because I am broke.

    beginning to look alot like christmas

    thanks dano

    Quote Originally Posted by woodenturn View Post
    DK should ban such nonsense. 2 cents~ sr86 www.dorikaze.net/showthread.php?32933-Elizabeth

  20. #160
    Join Date
    Mar 2004
    Location
    Calgary
    Posts
    2,614
    You should have a big-ass party
    "mmmango!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •