$$---the draggin wagon---$$

**paulcorolla** · 12-13-2012, 12:22 PM

Use an appropriately sized hole saw to cut and radius your traction bracket.
You need a flash, pictures are dark and I can not see

**JungleMatic** · 12-14-2012, 10:11 AM

I hole sawed.
Looks fine on mine. But ok, I'll make them brighter.

**JungleMatic** · 01-11-2013, 09:27 AM

I made some 4 links that don't hit my axle. On normal links if you go too low you end up hitting the axle housing because the mount is behind. These can go max low.

You can see them back there.
All tacked up.

Also, I like silver cars.

**JOshua a** · 01-11-2013, 09:42 AM

I'm jealous of your garage, and work of course

**JungleMatic** · 02-01-2013, 11:49 AM

https://www.facebook.com/photo.php?v=10150279533559957

Can everyone see this vid? ^
Anyway. It goes up and down now.

**natemc** · 02-01-2013, 12:06 PM

That shiet is soooo good

**Rastaracer** · 02-01-2013, 12:29 PM

Do you have the sport bags for the fronts?

**woodenturn** · 02-01-2013, 05:33 PM

I have problems with the vid ? technical problems that is

Originally Posted by JungleMatic

https://www.facebook.com/photo.php?v=10150279533559957

Can everyone see this vid? ^
Anyway. It goes up and down now.

**Warren** · 02-01-2013, 09:43 PM

Same. Get it together dude.

**woodenturn** · 02-01-2013, 09:56 PM

Work equip air ride aaaaannnnd. NADA

Originally Posted by Warren

Same. Get it together dude.

**JungleMatic** · 02-04-2013, 12:20 PM

Fine! Put it on youtube for the masses to enjoy.
I'm just screwing around with a valve stem into the line to see it all work. Working on all my elec valves and tank setup now.

**leboe** · 02-04-2013, 01:18 PM

Good amount of up and down

Leboe

**paulcorolla** · 02-04-2013, 04:33 PM

Perfect!

**JungleMatic** · 02-04-2013, 05:13 PM

Originally Posted by paulcorolla

Perfect!

Almost. Going to do this to my flares at some point http://jzxproject.com/bbs/index.php?...c=3758&page=11 Kevin and G are cool.
I think I can go down another 1 1/2"

**paulcorolla** · 02-04-2013, 06:02 PM

That's pretty cool, skillz bra!

**clay72** · 02-04-2013, 09:52 PM

But you are on 14s? 15s? Your as low as him he just has silly 18s.

Dunno, both look good.

**JungleMatic** · 02-23-2013, 11:44 AM

Asshole panhard to clear an underaxle exhaust at full up. The mount sits low so the axle will be centered at full low and ride height.
Shock mounts need to come up a but. I'm going to get some 4runner front shocks. They are 420mm compared to Camero at about 480mm.

Valves. China stuff.

Bought this because it was $400 and not $1000. Reviews are flakey though...I hope it works out.

ATTENTION Thinking of going air ride?
Buy a kit. Don't bother with diy. So far it's like 75% of the cost and a whole lot of screwing around. I wish I just got a nice brand kit and been done with it.
Leaks, and wires, and tubes. Not worth it.
It's been a ton of fun though...I like doing things myself