Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 43

Thread: FS: 84 Cressida Wagon

  1. #21
    Join Date
    Jul 2009
    Location
    Maple Ridge, Bc
    Posts
    306
    If you selling the r154, how much do you want for the trans?
    -Cam-

    85 RA64 Celica 22RTE CT26
    91 MX83 Cressida stock

  2. #22
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    The R154 is long gone. A friend blew his in november, just after I parked the wagon...

    As far as picking this up and driving it somewhere, It'd need a tranny installed first.
    I can definitely recommend a shop to have the job done at, or you could easily do it on the street in an hour or so. If you ask Corod nicely, he should be able to source a W58 + driveshaft from our local pick a part and deliver it for a low fee.

  3. #23
    Join Date
    Jun 2008
    Location
    Vancouver, BC
    Posts
    954
    Wouldn't a W58 on this car mean an entirely different flywheel and clutch, too? I seem to recall them being very different.
    1990 Supra Turbo

  4. #24
    Join Date
    Jul 2009
    Location
    Maple Ridge, Bc
    Posts
    306
    Where is Conrod located? and a w58 would be sweet.
    -Cam-

    85 RA64 Celica 22RTE CT26
    91 MX83 Cressida stock

  5. #25
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    A W58 would mean a new clutch IIRC.
    Corod is located in west kelowna, close to where the car is.
    http://www.dorikaze.net/showthread.p...-Parts-pulling

  6. #26
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    And here's a R154 for any of the AB/eastern guys who are interested in a lil roadtrip
    http://calgary.kijiji.ca/c-buy-and-s...AdIdZ342066657

  7. #27
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    Bump since some limp dick illiterate baby daddy mofo in Calgary wants me to find him a tranny, install it for him on my vacation and donate the car to his ungrateful ass.

    Just found an insane project that I'm picking up this week, so I'm accepting hella lowball offers if someone wants to pick it up or have it delivered to them between Kelowna and Winnipeg.

  8. #28
    Join Date
    Mar 2010
    Location
    westside kelowna bc
    Posts
    600
    Quote Originally Posted by cam_132 View Post
    Where is Conrod located? and a w58 would be sweet.
    Are you bill_C ???

  9. #29
    Join Date
    Aug 2008
    Location
    Saskatoon, SK
    Posts
    377
    Does that mean it is drivable again? Sorry for all your troubles with this thing, but I'd happily lowball you for it without the roof rack if you can drop it off in Saskatchewan somewhere for me. Haha.
    Quote Originally Posted by imbroglio View Post
    I don't care if your mom has vagina cancer and you need to dori your punk ass to the hospital to give her posies on her birthday, you're not getting my work equip 01's for $300.

  10. #30
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    It ain't drivable yet. If you've got a tranny, you could have it driving in a few hours...
    Hell, If you've got beer and a comfy floor I'd toss it in for ya!

  11. #31
    Join Date
    Jun 2008
    Location
    Abbotsford,BC
    Posts
    2,205
    I'll say it, just scrap it.

    2jzge 5spd Mx83 Cressida

  12. #32
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    Quote Originally Posted by Will Garrick View Post
    I'll say it, just scrap it.
    Tempting.
    I might just say f*ck it and turf a LS7/2JZ/4BT/7MGTE into it like I had originally planned...

  13. #33
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    At this point I'm tempted to just scrap this, as I've found a clean chassis and an awesome engine to swap in here in MB.
    If anyone is interested come June, I'd see it gone for $300 (or wheels, suspension or aero in trade) delivered in the lower mainland. I'd proll deliver as far east as Calgary for the cost of fuel.
    I have a complete low low mileage auto trans w/ everything needed which could be included if someone just wanted a fun cruiser.
    Last edited by hisnibs; 04-24-2012 at 07:29 PM.

  14. #34
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    Quote Originally Posted by Will Garrick View Post
    I'll say it, just scrap it.
    Pretty much ready to do this, tho it is an unusual old school toy.

    I'd happily trade it for some dope 4/5x114 wheels, a big holset or 2, or some toyota diesel goodies.

    Otherwise I'm pulling all the goodies off and scrapping her...

  15. #35
    Join Date
    Sep 2004
    Location
    Anus Victoria
    Posts
    5,333
    Never scrap, donate to people. You can never buy a new shell, even if it's rotten. give it to someone who has one, so they can cut the pieces they need from it.
    SpeedHero

    Spirit of the Street, King of Sport

  16. #36
    Join Date
    Jun 2008
    Location
    Vancouver BC
    Posts
    101
    Hnnnngh. Please please don't do this. I'm in Vancouver and I'm pretty tempted by this, but I have zero dollars at the moment. If you still have this in a month or two, I can make it disappear. Just please don't scrap it, these cars are way too ****ing cool for that.

  17. #37
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    Does anyone actually want to adopt it? My storage place is gone in 2 weeks and I'm sick of paying to keep something I can't drive of even work on. I might drag her home and stash her in the bush, but she needs a fair bit of body/composite work, so Blarg.

  18. #38
    Join Date
    Sep 2004
    Location
    Anus Victoria
    Posts
    5,333
    Is the car in BC or Manitoba?
    SpeedHero

    Spirit of the Street, King of Sport

  19. #39
    Join Date
    Jul 2008
    Location
    Winnipeg, MB
    Posts
    80
    The car is in kelowna and Im in manitoba.
    I'll prolly head out to bc in a week or so to deal with 'er among other things...

  20. #40
    Join Date
    Nov 2008
    Location
    Quesnel B.C.
    Posts
    1,632
    just google'd it, 7 1/2 hr drive from me which is like 12 hrs if i wanted to come down with the cruiser and drag this back. The guy i gave an mx63 cressida to needs a motor and such so im trying to convince him this is a good deal for him.
    81,84,87, 88 toyota cressida, 84 bj60, 85 bj60, 86 hj60soa, 71 datsun 521 pickup

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •