Results 1 to 12 of 12

Thread: Edmonton - AE92 GTS Parting out

  1. #1
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195

    Edmonton - AE92 GTS Parting out

    Just what it says on the box - parting out an '88 AE92 GTS. White exterior and the obligatory red interior that always seems to go with it. I'm keeping the engine w/ ECU and struts/springs, everything else is up for grabs. (clarification: when I say engine, I mean long block with all accessories, sorry but if it is directly attached to the engine, it is not for sale, with the exception of the airbox and piping, which are for sale.) I am taking it apart in my spare time after work, so if you want something in particular, I can get it for you within a day or two if I haven't gotten to it yet. C52 is in good shape, shift cable not so much... Front alignment parts (tie rod ends, ball joints, etc) and clutch master cylinder are shot. Doors are somewhat rusty, but hood, trunk lid (spoiler) and bumpers are in good-ish condition. Driver's fender is good, passenger fender not so good. Headlight motors work, mirror motors work, no power windows. Side skirts are in good condition, looks like rattle can painted black. Door and trunk locks do not work. Other than the passenger side door sill trim being broken, the interior is in pretty good condition, except for the (always) ripped bolster on the driver's seat. Since I have to post prices, I will just say any part is $10,000, but I am of course open to MUCH lower offers. Any reasonable offers in fact, which may be 0$ for small things!
    EDIT: Pics posted. See below.
    PM for info!
    Last edited by ae92man; 09-24-2014 at 05:03 PM. Reason: Pics added, engine definition clarified
    DK lurker-in-chief

  2. #2
    Join Date
    Jul 2008
    Location
    Vancouver, BC
    Posts
    48
    I'm interested in pair of ball joints. Both my front ball joints are squeaking and stiff. How much SHIPPED to Vancouver, BC, V5R 3V6?
    I don't frequent these forums so if you e-mail me at temporarykilo@hotmail.com it would be much appreciated. Thanks.

  3. #3
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195
    Better late than never, here are pics of interior and exterior. No useful pictures of interior rear since it is in a pile in the trunk, but other than a broken clip and bolt or two, it is complete and although could use a steam clean, in good condition. The roof liner and any other parts you don't see (sunroof switch etc.) are available, have just been removed. I posted this on Kijiji and a guy from Illinois contacted me wanting me to ship a bunch of stuff to him, and I warned him it would be expensive. He said, "na don't worry I can work it out."
    After chatting via text for a while, he got back to me again and said it would cost him 400$ to ship the parts he wanted... Couldn't say I didn't warn him! Needless to say, he changed his mind. I reiterate for anyone interested, I am taking offers for anything you want, and I will remove it for you. If there is no interest, I will prep and prime the body panels and keep them, and everything else goes to the crusher. I am simply taking it apart for fun and practice in my spare time, and trying to be helpful to anyone in the 780 area (or anywhere else if willing to pay shipping). I assure you, my prices would be very reasonable, i.e. less than pick n pull.

    Click image for larger version. 

Name:	20140922_180400.jpg 
Views:	15 
Size:	291.5 KB 
ID:	13704Click image for larger version. 

Name:	20140922_180415.jpg 
Views:	7 
Size:	293.0 KB 
ID:	13705Click image for larger version. 

Name:	20140922_180444.jpg 
Views:	9 
Size:	241.8 KB 
ID:	13706Click image for larger version. 

Name:	20140922_180509.jpg 
Views:	11 
Size:	338.0 KB 
ID:	13707Click image for larger version. 

Name:	20140922_180528.jpg 
Views:	7 
Size:	264.2 KB 
ID:	13708Click image for larger version. 

Name:	20140922_180538.jpg 
Views:	9 
Size:	285.5 KB 
ID:	13709Click image for larger version. 

Name:	20140922_180547.jpg 
Views:	9 
Size:	261.2 KB 
ID:	13710Click image for larger version. 

Name:	20140922_180604.jpg 
Views:	7 
Size:	263.7 KB 
ID:	13711Click image for larger version. 

Name:	20140922_180613.jpg 
Views:	11 
Size:	313.7 KB 
ID:	13712Click image for larger version. 

Name:	20140922_180646.jpg 
Views:	7 
Size:	326.9 KB 
ID:	13713Click image for larger version. 

Name:	20140922_180657.jpg 
Views:	11 
Size:	348.2 KB 
ID:	13714Click image for larger version. 

Name:	20140922_180706.jpg 
Views:	8 
Size:	328.3 KB 
ID:	13715Click image for larger version. 

Name:	20140922_180715.jpg 
Views:	6 
Size:	326.0 KB 
ID:	13716Click image for larger version. 

Name:	20140922_180737.jpg 
Views:	9 
Size:	275.9 KB 
ID:	13717Click image for larger version. 

Name:	20140922_180910.jpg 
Views:	18 
Size:	453.0 KB 
ID:	13718Click image for larger version. 

Name:	20140922_180926.jpg 
Views:	13 
Size:	320.2 KB 
ID:	13719
    Last edited by ae92man; 09-23-2014 at 02:30 PM. Reason: verbosity on a grand scale
    DK lurker-in-chief

  4. #4
    Join Date
    Sep 2008
    Location
    Toronto
    Posts
    34
    I would be interested in a few pieces of the interior. I'll have to go to my car and take some notes of what I need. I'm in Toronto BTW.
    1990 Celica Turbo4wd - 1990 Corolla GT-S - 2002 RX300

  5. #5
    Join Date
    Sep 2014
    Location
    Edmonton, AB
    Posts
    9
    I could really use a few engine things, like a new coolant reservoir and top mounting brackets for the radiator. Maybe the front signal lights if they fit on my ae86. I'm in edmonton and can just come by. Im sure there could be other things I am not thinking of.

  6. #6
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195
    I'll drop you a PM with my number, just let me know when you want to meet up!
    DK lurker-in-chief

  7. #7
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195
    Update - The parts that have been sold or are pending are:
    - Sunroof motor, cables and tracks
    - Seat belt trim covers (all 4)
    - Radiator stays
    - Wiper arms
    - Quarter window trim
    - B-pillar cover (from rear side of doors)
    - Front passenger seat belt
    - Sun visors
    - E-brake handle
    - Front signal light assemblies
    - Antenna
    The car is going to be towed away on halloween or November 1st, so if anyone wants anything for their AE92's, now is the time. The entire car has now been disassembled except for the engine/transaxle, which will be out in the next few days. Small stuff can be had for free, and everything else is very reasonably priced.
    Last edited by ae92man; 10-19-2014 at 05:05 PM.
    DK lurker-in-chief

  8. #8
    Join Date
    Jun 2012
    Location
    Nanaimo, BC
    Posts
    636
    I'm interested in the injectors and cup holder unit if you still have those

  9. #9
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195
    Apologies, but I'm not sure I want to part with the injectors. I am keeping the engine and all of the stuff needed to make it run, which obviously includes injectors If you want the cup holder, it's all yours, free of charge. Would you like me to ship it to you, or do you have someone here/yourself to pick it up?
    DK lurker-in-chief

  10. #10
    Join Date
    Jun 2012
    Location
    Nanaimo, BC
    Posts
    636
    If there was more I could use off the car I would say ship it but I'll just pass. Thanks tho

  11. #11
    Join Date
    Sep 2008
    Location
    Toronto
    Posts
    34
    Just want to say that ae92man is a pretty motivated seller and it was a pleasure dealing with him.
    1990 Celica Turbo4wd - 1990 Corolla GT-S - 2002 RX300

  12. #12
    Join Date
    Sep 2008
    Location
    Edmonton, AB
    Posts
    195
    Car is gone now. Mods please close.
    DK lurker-in-chief

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •