Results 1 to 16 of 16

Thread: 2 Smallports, JDM Smallport MAP setup, New in Box Colt Cams (4ag), etc..

  1. #1
    Join Date
    Jun 2004
    Location
    Victoria, BC
    Posts
    5,640

    2 Smallports, JDM Smallport MAP setup, New in Box Colt Cams (4ag), etc..

    1 - Smallport 4A, completely unknown mileage, Ive put about 50k on it in the last 5 years. Before putting it in the car 5 years ago I: Pulled head and sent it to GTSPartsman for a full rebuild (head only), installed and regasketed whole engine, new OEM Toyota waterpump, tbelt etc..etc.. Valve covers powdercoated black, will come ready to drop in, running on bluetop electronics with a reversed Smallport intake mani, probably no flywheel (but Ill have a look. might have a spare). Only 2 downsides - ive modified the throttle body to remove the troublesome idle up coolant valve on the bottom.. so when you start it up cold you've gotta keep your foot on the accel to keep revs up for 30-60 seconds.. and it currently eats a bottle of oil every 2 tanks of gas.. doesnt burn blue out the back, it just disappears.

    $500 SOLD



    2 - Smallport 4A, 127,000KM. Completely stock with wiring harness/ecu/flywheel/unmodified intake etc. Removed from a rust-condemned AE92 GTS years ago, has sat in the back of my shop since. Ran well when we parted it..

    $800



    3 - New In Box set of Colt Cams.. never used.

    (intake)
    Stage II 261 degrees total duration (223 @ 0.050") and 0.326" lift (8.27 mm) 1500-7000 RPM

    (exhaust)
    Stage III 268 degrees total duration (229 @ 0.050") and 0.328" lift (8.27 mm) 3500-7000 RPM

    $700 SOLD


    4 - JDM Smallport Wiring setup - Collected this from a bunch of ebaying, forum buying, and scrounging. Going to lose money on the deal, but have gone a different route. Its been awhile since Ive done my research, but from what I recall, this is a complete JDM Hicomp/Redtop/Smallport MAP setup. Get rid of that pesky AFM, opens the possibilities of a piggyback to tune, or just a different, rare part to throw on.

    Comes with a complete engine harness, dizzy with heat shield (no cap), *2* ECU's, igniter, coil, tps, map sensor, multiple spare ECU plugs to pull pins from and adapt to your AE86 harness.

    $400 SOLD





    Feel free to make reasonable offers, price will get better if buying more than one item. Will ship anything thats not a motor. Payment via Cash or EMT preferred..

    Delivery in Vic area available for free, up island is possible, but we'll talk about a small delivery fee .. truck eats gas bigtime.
    Last edited by celica-fiend; 07-11-2015 at 06:57 PM.
    '87 AE86 - GTSR5 - Daily Driver
    '72 RA21 Celica - 'Ill build it one day'
    '73 RN27 Hilux - Restomod in progress
    '80 MX32 Cressida - Next in the project queue
    '91 SV25 Camry All-Trac - Winter DD

  2. #2
    Join Date
    Jul 2008
    Location
    Vancouver BC
    Posts
    2,984
    my favourite variation of the 4age up to date. has so much potential, boost, high comp Na, oil drain on the back of the head, perfect size ports, h beams, 42mm full counterweight crank, oil squirters

  3. #3
    Join Date
    Aug 2009
    Location
    Shemale lover
    Posts
    4,763
    Smallports are the best.

    [ShamelessPlug]I can flip intakes for pretty cheap on these![/ShamelessPlug]
    BCWORKS

  4. #4
    Join Date
    Feb 2011
    Location
    Kumamoto Japan
    Posts
    2,515
    I love small ports too! I kinda really want those cams...

  5. #5
    Join Date
    Jul 2005
    Location
    Victoria BC
    Posts
    3,024
    Smallports are the only 4age you should waste your time with.
    1987 Corolla GTS Hatch | 1985 Corolla GTS Coupe | 1987 Corolla GTS Coupe | 1992 Tercel CE | 1992 Paseo | 2003 Corolla CE | 1974 Corolla 4 Door | 1978 Corolla Coupe | 1979 Corolla Hatch SR5 | <3||||||1990 Miata |||||| <3
    I like Toyota's wanna fight about it?

  6. #6
    Join Date
    Nov 2012
    Location
    Brampton, Ontario
    Posts
    1,488
    Quote Originally Posted by Blade7 View Post
    I love small ports too! I kinda really want those cams...
    blain, get the MAP setup and the cams and I'll hack the computers for you at cost.

    it'll rev over 9000

    not that that's a good idea necessarily.

  7. #7
    Join Date
    Jun 2004
    Location
    Victoria, BC
    Posts
    5,640
    Do it Blain.. doooooooo it...

    Brett
    '87 AE86 - GTSR5 - Daily Driver
    '72 RA21 Celica - 'Ill build it one day'
    '73 RN27 Hilux - Restomod in progress
    '80 MX32 Cressida - Next in the project queue
    '91 SV25 Camry All-Trac - Winter DD

  8. #8
    visean's Avatar
    visean is offline Yo, troubled night in the John
    Join Date
    Nov 2005
    Location
    Victoria BC
    Posts
    2,220
    Quote Originally Posted by Sparkie View Post
    blain, get the MAP setup and the cams and I'll hack the computers for you at cost.

    it'll rev over 9000

    not that that's a good idea necessarily.
    Wrong. That is a good idea!

  9. #9
    Join Date
    Feb 2011
    Location
    Kumamoto Japan
    Posts
    2,515
    Well I already have half a JDM ECU swap, but it's not as substantial as a large port one, you trade 5hp for 5 torque. I like the cams more, but I get paid at the end if the month, and if they are here, I'll probably take them.

  10. #10
    Join Date
    Mar 2004
    Location
    Deadmonton, AB
    Posts
    2,366
    Sent Pm
    Mat 83 GTS Hatch 87 GTSR5 Coupe
    Quote Originally Posted by KingSpence View Post
    If only I put the same amount of effort into my schooling as I do my car. Education is important, but racecar is importanter.
    Stuff I'm Selling
    IG Mattyballz86

  11. #11
    Join Date
    Jun 2004
    Location
    Victoria, BC
    Posts
    5,640
    bump, open to reasonable offers

    brett
    '87 AE86 - GTSR5 - Daily Driver
    '72 RA21 Celica - 'Ill build it one day'
    '73 RN27 Hilux - Restomod in progress
    '80 MX32 Cressida - Next in the project queue
    '91 SV25 Camry All-Trac - Winter DD

  12. #12
    Join Date
    Feb 2011
    Location
    Kumamoto Japan
    Posts
    2,515
    I want those cams! I sent a few PM's. Let me know if you still have them.

  13. #13
    Join Date
    May 2014
    Location
    Vancouver, BC
    Posts
    13
    I might be in the market for one of these, just need to run a few things by my mechanic. I'll PM you tomorrow.

  14. #14
    Join Date
    Jun 2004
    Location
    Victoria, BC
    Posts
    5,640
    Cams are sold, both motors still around..

    brett
    '87 AE86 - GTSR5 - Daily Driver
    '72 RA21 Celica - 'Ill build it one day'
    '73 RN27 Hilux - Restomod in progress
    '80 MX32 Cressida - Next in the project queue
    '91 SV25 Camry All-Trac - Winter DD

  15. #15
    Join Date
    May 2011
    Location
    calgary ab
    Posts
    64
    ill take the entire smallport wiring setup including dizzy and ecu if u can ship it to calgary

    bro!

  16. #16
    Join Date
    Jun 2004
    Location
    Victoria, BC
    Posts
    5,640
    Updated first post, everythings gone but the low mileage Smallport..

    You buy now.

    Brett
    '87 AE86 - GTSR5 - Daily Driver
    '72 RA21 Celica - 'Ill build it one day'
    '73 RN27 Hilux - Restomod in progress
    '80 MX32 Cressida - Next in the project queue
    '91 SV25 Camry All-Trac - Winter DD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •