Results 1 to 5 of 5

Thread: Spark and fuel tables for SDS

  1. #1
    Join Date
    Feb 2004
    Location
    Calgary/Purgatory
    Posts
    5,348

    Spark and fuel tables for SDS

    Anyone have anything for a bluetop? (with ST ITBs would be even better)

    Should I just find MS tables and use the same values? (not sure if the chart size is the same)

    I've never ran SDS, this is for Dads Super 7.


    RETIRED

  2. #2
    Join Date
    Nov 2004
    Location
    windsor quebec
    Posts
    1,706
    Spark table you can use pretty much the same.

    Fueling, I don't even know how SDS calculates, I'd guess you'll have to start from scratch.

  3. #3
    Join Date
    Mar 2004
    Location
    Koriyama, Japan
    Posts
    3,221
    When my brother had an SDS, he got his base fuel map from SDS directly. Have you contacted them?

  4. #4
    visean's Avatar
    visean is offline Yo, troubled night in the John
    Join Date
    Nov 2005
    Location
    Victoria BC
    Posts
    2,220
    As a starting point, you can check out the startup file for the DIYPNP and use those values for your ignition map.
    https://www.diyautotune.com/support/...oyota-corolla/

    Your fueling will be way different. You'll likely end up using alpha n or some hybrid load method for fuel load with itbs rather than speed density.

    Can SDS do alpha n?

  5. #5
    Join Date
    Feb 2004
    Location
    Calgary/Purgatory
    Posts
    5,348
    Quote Originally Posted by visean View Post

    Can SDS do alpha n?
    Not sure if it does. He's got a vac manifold setup for now. I've heard of success running them like that, we will see.

    Turns out a guy who works at SDS lives about 5min away from Dad, so he's going to come over and help for startup

    I'm going to be running it on my 1uz with ITBs, so it will be a good learning experience for sure.


    RETIRED

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •