Results 1 to 20 of 28

Thread: Serendipity's comprehensive AE86 J160 swap

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #21
    Join Date
    Nov 2010
    Location
    Beyond the Sun
    Posts
    1,277
    STEP 7: FINAL CONSIDERATIONS FOR CHAPTER 1: FITMENT


    Using a T50 Starter

    DISCLAIMER: if you choose to use a T50 starter, then make sure you have it rebuilt before you install it. Once installed with the SQ adapter, it'll be impossible to remove without dropping the transmission. Have a look why. It’s bolted to the adapter from the bellhousing side toward the engine:
    Click image for larger version. 

Name:	Starter goes here.jpg 
Views:	15 
Size:	199.0 KB 
ID:	15685Click image for larger version. 

Name:	Bolts Deep Baby.jpg 
Views:	19 
Size:	216.3 KB 
ID:	15683Click image for larger version. 

Name:	From the inside.jpg 
Views:	16 
Size:	196.0 KB 
ID:	15684

    Intake side starter
    As this option was impossible due to the waterline kit we've installed, we have no information for you on the ins and outs of this possibility.


    Upgrade to a Honda starter
    DISCLAIMER: If you want to use a Honda starter on LHD AE86s, you’ll need to have a manual steering rack, as there is not enough clearance otherwise. See below for more information.

    Having to drop the transmission in order to service the starter is no fun, so we bought the SQ Honda starter adapter and sourced a brand new starter. With this setup, we’ll be able to service the starter anytime without a huge fuss. It’s also, smaller, lighter, and as a gear reduction unit (1.2kw), more powerful than the direct drive T50 starter (0.8kw). Win win. In the SQ tech article, it states the following Honda engine code compatibility for AUTOMATIC TRANSMISSIONS ONLY:

    -F22A
    -F22B
    -F23A

    After some digging, we found that the F22B and F23A are only found on RHD Honda models (correct us i we're wrong), so if you’re in North America, the F22A starter would be easier to get. We found that the part number Mitsuba SM42228, is interchangable with the 1997-98 Honda Prelude, under the number, Mitsuba SM16960.

    As you can see, the Honda starter pinion comes out much further than the T50's, which is why the SQ adapter is so thick.
    Click image for larger version. 

Name:	Adapter.jpg 
Views:	21 
Size:	131.4 KB 
ID:	15686Click image for larger version. 

Name:	Honda vs Toyota.jpg 
Views:	20 
Size:	231.6 KB 
ID:	15687Click image for larger version. 

Name:	Mine's bigger.jpg 
Views:	19 
Size:	247.0 KB 
ID:	15688


    The area between the u-joint and the starter is as tight as a nun. Using a bolt with a smaller shoulder than the one supplied or an allen key bolt instead would do the trick. We were just able to slide a wrench over the bolt.
    Click image for larger version. 

Name:	Bigger isn't better.jpg 
Views:	20 
Size:	202.1 KB 
ID:	15689Click image for larger version. 

Name:	Motion in the Ocean.JPG 
Views:	20 
Size:	166.9 KB 
ID:	15691Click image for larger version. 

Name:	Wrench.JPG 
Views:	18 
Size:	206.3 KB 
ID:	15690Click image for larger version. 

Name:	Done.JPG 
Views:	17 
Size:	243.3 KB 
ID:	15692

    Now after seeing how little room there is with a manual rack, have a look at this next picture of my former power steering rack sitting next to my current manual rack. The size difference is why we believe it’s impossible to use the Honda starter setup with a power steering rack.



    The final test was done with the flywheel in place. Look ma! It works!!
    Click image for larger version. 

Name:	FullSizeRender(4).jpg 
Views:	28 
Size:	167.1 KB 
ID:	15682
    Last edited by Serendipity; 04-28-2018 at 04:59 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •