Results 1 to 3 of 3

Thread: Finally Some Pics of my 3T/2T(Head) Motor

  1. #1
    Join Date
    Jul 2004
    Location
    Calgary
    Posts
    2,532

    Finally Some Pics of my 3T/2T(Head) Motor

    Hey all, got to work early this morning and went and took some pics of my motor.
    It is a 3T bottom end with 0.060 over sized pistons. Rods are Beamed, Shot peened and balanced. Cam is a regrind with better lift (not sure of the specs). Pistons have been fly cut for clearance. The head has minor port and is polished. I have ARP head studs from a 22RE. Steel intake with welded and tapped holes for the Wet nutrous. And now to the pics....








    Without intake, nice straight shot to valve, and then with the intake, still nice straight shot to valve.



    So that will be in my TE31... at some point. Hopefully sooner than later.

    Hope you all enjoy, more pics will come once motor is home. Got another engine stand today too... $30 can't go wrong.
    Bryan
    DK Moderator




  2. #2
    Join Date
    Mar 2004
    Location
    Calgary
    Posts
    2,614
    That intake looks trick! Nice work.
    "mmmango!"

  3. #3
    Join Date
    Jul 2004
    Location
    Calgary
    Posts
    2,532
    Thanks, I bought it with my Delortos. It certainly did not look this nice when I bought it. I will have to make another hole in it for the brake booster though Probably no.4 :cool: Oh well.
    Bryan
    DK Moderator




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •